1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

gsr swap parts list?

Discussion in 'HYBRID -> EG-EK / DC' started by dc2_teg, Oct 13, 2007.

  1. dc2_teg

    dc2_teg New Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Sep 27, 2007
    i have a 97 integra ls and the motor is a 97 jdm sir-g/gsr, both are obd2.

    my parts list is as follows

    engine jdm b18c

    us gsr engine wire harness

    jdm ecu

    do i need the full gsr exhaust manifold or can i just get an extension or what ?

    i will still use the ls tranny with new clutch and the motor will have a blox intake.

    that should be all i need right. please correct me if i am wrong.
    and with the engine harness, theres only 3 plugs on my ls and 4 on the gsr engine harness the extra is the one for v-tec. i will have to cut the plug and wire it straight to the ecu. i think.

    please help as im getting all the parts soon and want this completed sooner then later and i want it done right. thanks
     
  2. civic4g63

    civic4g63 New Member

    Messages:
    77
    Likes Received:
    0
    Joined:
    Sep 29, 2007
    Location:
    fl 1 hot place
    u will need a 97 gsr dizzy and the wire harness will plug in an play, but u just need to wire vtec the ecu. unless u have a jumper harness with a chipped ecu, but u will need a 96-98 gsr ecu, if u dont have a jumper harness.
     
Verification:
Draft saved Draft deleted

Share This Page