1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Head light adjustment

Discussion in 'Body / Exterior / Interior / Cosmetics' started by DYTRADER1628, Aug 3, 2004.

  1. DYTRADER1628

    DYTRADER1628 Member

    Messages:
    37
    Likes Received:
    0
    Joined:
    Sep 16, 2003
    I went to get my inspection sticker today. The dude said i need to adjust my drive side head light. I dont know what to adjust. I need to raise it a little the beam is point too low. I see 2 screws on each side put i dont know which way to turn them or which ones. Or do i mess with the bolts on top that hold the housing?
     
  2. KloggMonkey

    KloggMonkey Member

    Messages:
    92
    Likes Received:
    0
    Joined:
    Jun 27, 2004
    Location:
    KS
    probably should be under gen. tech and mat.


    There will be two screws... one is left and right the other is up and down...

    Pull up to your garage door and turn your lights on...


    measure where they are now...

    make adjustments....

    problem solved... :D
     
  3. YouKnowWhoIBee

    YouKnowWhoIBee my avatar is better.

    Messages:
    2,257
    Likes Received:
    7
    Joined:
    Dec 22, 2003
    Location:
    Maryland
    If it is a 92-95 civic like i think you have it is simple. Yeah dont mess with the top screws Those 2 bigger phillips head screws you need to turn to adjust. I parked next to my garage and turned my lights on. I seen that they were way off so i adjusted the 2 screws on the side of the headlight. Till they alligned. Simple if you got a 92-95 civic. Not sure about other hondas. But thats my .02
     
Verification:
Draft saved Draft deleted

Share This Page