Help Please--Wont Start

We may earn a small commission from affiliate links and paid advertisements. Terms

K

kelkou

New Member
swapped a b16 into my HB. Started after a little turning over, running on 3 cylinders. 1st cylinder burning very hot, not getting enough fuel. Car is started and for some reason friend pulls plug 1, car keeps running, had no effect on car whatsoever. he pulls plug 2, car dies. we start it up, pulls plug 3, car dies, doesnt come back on.. wont restart at all.
what could possibly be affected by this? other than a surge sent back to the dizzy, because im still getting spark.
changed the injectors still wont start
any advice?
b16a swap, new plugs.
 
The car cant be flooded, its been days. The car had been started before, why would simply pulling the plug wire affect vaccum lines?

so its possible by pulling the plug wire to burn a fuse?
 
mayeb pullin out the plug wire with no place for the spark to go and just increasing increasing increasing voltage till u ruin ur ignition coil.
 
You must log in or register to reply here.
Back
Top