1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

here's a simple qestion asked by a newbie

Discussion in 'Civic and del Sol - EG and EK' started by azcivic00, Jul 4, 2010.

  1. azcivic00

    azcivic00 New Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Jul 4, 2010
    i got one question, what modification will i need to do to my "y8" wire harness to my B18c1 swap?
    your insight would be awesome...

    i'mma newbie as stated in the title...
     
  2. D16SiHatch

    D16SiHatch New Member

    Messages:
    1,297
    Likes Received:
    44
    Joined:
    Sep 7, 2007
    off the top of my head i know you will need to run a wire for the iab's (secondary butterflies). that is unless you're using a different intake manifold.
     
  3. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,020
    Likes Received:
    3,948
    Joined:
    Sep 28, 2002
    Location:
    CT
    yeah provided that you are swapping in an OBD-2 B18C1, then all you should need to add is the IAB wires

    you will also need to lengthen a few others to reach the new locations... not really a big deal
     
  4. azcivic00

    azcivic00 New Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Jul 4, 2010
    thanks guys,
    i'm only 3 bills away from gettin my engine, my obd2 B18C1...
    right now i'm gathering/well at this piont i'm still researchin all the parts needed...
    i wanted to do this swap for a very long time. now seem to be workin it's way into progress..

    in time i'm lookin to be boosting...
     
  5. azcivic00

    azcivic00 New Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Jul 4, 2010
    the only problem i see is, the valve cover is damage. thats not a biggie though.
    the engine isn't coming with a tranny. thats on the list of parts i need...
     
Verification:
Draft saved Draft deleted

Share This Page