91integra b18
New Member
i have a 91 integra. will seats out of a 94 integra fit?
i need info on seats.
- Thread starter 91integra b18
- Start date
- Replies 3
- Views 624
We may earn a small commission from affiliate links and paid advertisements. Terms
78civic
Junior Member
They may or may not.. The best thing would be to go to a u-pull-it yard or the like and take a camera phone and take pics of the 94, then compare it to what you have now.
I'm not being snide, just that I tried the later teg seats in my 90 4dr and couldn't get the chime/lights to go out in the dash.
I ended up taking off the retractable portion off the teg seatrail and welding it to a 89 prelude seat rail..
It's a little tight with that retractor near the bolster but it's do-able.
I did take out the controller under the dash (since I was replacing the carpet) and havn't hooked it back up.
The Prelude seat didn't have the same 4-wire connector under. Just the 2-wire one. This is just an idea if it ends up actually not working right
Hope you find one.
E
I'm not being snide, just that I tried the later teg seats in my 90 4dr and couldn't get the chime/lights to go out in the dash.
I ended up taking off the retractable portion off the teg seatrail and welding it to a 89 prelude seat rail..
It's a little tight with that retractor near the bolster but it's do-able.
I did take out the controller under the dash (since I was replacing the carpet) and havn't hooked it back up.
The Prelude seat didn't have the same 4-wire connector under. Just the 2-wire one. This is just an idea if it ends up actually not working right
Hope you find one.
E
Last edited:
91integra b18
New Member
i just need to know it the bolt holes will line up
Bolt holes, no.
Similar threads
