If you had.....

[orosco]

If you had $5K to blow right now what would u do to your B-series motor..Would u build the block, slap on a turbo, go crazy with the head..Im curious at what peoples ideas are..Im unsure of what i want to do..I have an integra LS and want to build it up..

 

[b16efhatch]

Sell the LS motor and buy a Type R swap

 

[Citizen_Insane]

f that. You could build an awsome turbo setup for $5000 and be making twice as much power as that ITR swap.

 

[sireg]

build the bottom end, low comp. type r head, then turbo

 

[lude9593]

Originally posted by sireg@Apr 6 2005, 10:32 PM
build the bottom end, low comp. type r head, then turbo

[post=483991]Quoted post[/post]​

it might be hard to do all that with 5k.

 

[92dxhatch]

rebuild it and boost the crap out of it some good HP gains.

 

[b204dr]

5k - boosted lsv- with bottom end wouldnt be to hard

 

[lude9593]

i just don't think you could get a type r head or build the head and still boost and build the bottom end as well for under 5k. it'd be really close.

 

[b204dr]

b16 head-350-500
building top end - 300-1000+
turbo - custom- 1000-1500
uberdata! free
bottom end -piston rods rings-1500-2000
---------------------------------------------
grand total 5000 give or take could cost more or less depending how far blown he wants to go

 

[projectxspeed]

It would be really hard. My moderate turbo setup cost 3.5K. That would leave 1.5K to rebuild the bottom and head. So if you skip sleeves it is totally doable.

 

[VTEC_CBR]

that's give me 5k more for down payment on an STi

 

[posol]

sleeves, pistons, rods, assembly, shipping = 2k
t3/t04e turbo -500 used
ic - 300 used
DIY ic piping/couplers/clamps - 200
uberdata - free, but you need a chip burner, a wideband, and dyno time - 500-1000
dsm 450 injectors -50
3" exhaust - 300-500
oil lines, 100
boost gauge, 50

done