RichmondEG
New Member
Hey Guys, im new around here and would like to ask for some help. Last weekend i did my first swap. JDM d15B vtec put into my 95 dx HB. The swap was pretty simple and i thought i did everything right. Wired the Vtec and oil pressure switch. The P28 i had was for an Auto so i had to convert that to Manual. Swaped in a EX tranny and new Exedy stage 1 clutch. So everything go's smooth and i fire up the car. Wow no CEL's at all. Take the car for a spin and when i punch the gas i can feel the extra kick it has. NICE!!! but as im coming back i hit the gas again then i let go and the car keeps revving up. I check for vaccume leak and could not find one. There are 2 things i can think of. First it sounds like the throw out bearing is bad. making noise even tho its new. 2nd maybe can it be due to me using my old B7 Intake Mani? i had to clamp one of the hoses off as it is not used on the D15B. Either im guessing that hose is leaking a little or maybe i need a Vtec intake mani as this seems to only happen when i go WOT. Can someone shed some light on this for me.