1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

JDM H22A into 92 Accord LX (Help)

Discussion in 'ECU's, Electronics, and Tuning' started by H22A1Accrd, Jul 30, 2003.

Thread Status:
Not open for further replies.
  1. H22A1Accrd

    H22A1Accrd Junior Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Jul 29, 2003
    I am in the middle of a H22A swap and i am trying to wire the motor right now, I am using the accord wireing harness and i have p13 ECU. There is a extra plug that was on the p13 ecu with four wires, (vtec right?) What exactly are they for? Also the lude's harness has some wires in the plugs that aernt there for the accord plugs. Do i have to swap some wires or something. Both cars were manual. I have been getting alot of different info and i am getting confused. Which wires need to be lengthened? Also did the JDM prelude use one or two o2 sensors? I bought a dc sports 4-2-1 header is it going to work. Sorry for all the ??? but any info will help. Thanks
     
  2. dohcvtec_accord

    dohcvtec_accord WRX Sellout

    Messages:
    8,433
    Likes Received:
    1
    Joined:
    Sep 29, 2002
    Location:
    The left lane
    Please refer to our FAQ. There is no need to post your topic more than once.

    This topic has been closed by a moderator. Please continue your question in the other thread that you started.

    Thanks, Moderating Team

    :locked2:
     
Thread Status:
Not open for further replies.

Share This Page