mikesleepercivic
New Member
well its finially done i had a 93 accord that was wrecked it had a jdm f22a with a dsm 1st gen turbo setup the turbo is the big 16g turbo 450cc injectors ported and polished intake manifold walbro 255 fuel pump the ecu is a p06 tuned with Neptune its been dyno tuned it puts down 198hp 190flb torque i have been told that altitude has alot to do with hp numbers and where i live is right about 9000 ft above sea level anyways i came across a 91 civic dx with a bad motor for FREE
this car is clean no rips or tears on the interior good paint so i decided to swap it all over i put the f22a into the civic with of course the turbo i used the h22 swap mounts getting axles was allitle bit of a pain the passanger side is from a 92 integra and the driver side is from a 89 integra the side wall on the drivers side had to be pounded in so the pully would clear very tight fit i used the dx wiring harness i just added two more injectors it has a exeedy stage three clutch msd coil 2 1/2 exhaust strait out the back it was nice to have a complete donor car i had to get a cable to hydralic conversion that was probley the most expencive part in the whole swap all in all it was alot of work but it was well worth it its taken about 4 months to do ive read many different post sayin why would u do this kind of swap i can say now is it was worth it ill try to post come pics soon
this car is clean no rips or tears on the interior good paint so i decided to swap it all over i put the f22a into the civic with of course the turbo i used the h22 swap mounts getting axles was allitle bit of a pain the passanger side is from a 92 integra and the driver side is from a 89 integra the side wall on the drivers side had to be pounded in so the pully would clear very tight fit i used the dx wiring harness i just added two more injectors it has a exeedy stage three clutch msd coil 2 1/2 exhaust strait out the back it was nice to have a complete donor car i had to get a cable to hydralic conversion that was probley the most expencive part in the whole swap all in all it was alot of work but it was well worth it its taken about 4 months to do ive read many different post sayin why would u do this kind of swap i can say now is it was worth it ill try to post come pics soon