1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Mini Me ? please help

Discussion in 'Civic and CRX - EF' started by autox 89 dx, May 11, 2008.

  1. autox 89 dx

    autox 89 dx Member

    Messages:
    332
    Likes Received:
    8
    Joined:
    Mar 21, 2008
    Location:
    SF bay area
    i got a 91 si with a d16a6 and i got a Z6 head thats at the machine shop getting redone right know i also got a P28ecu and a odb1 dizzy. I'm gonna order the jumper harness from rywire Rywire - Online Store is there anything else im missing?Also is this something i can get done over a weekend this is my daily driver and i dont really have anything else to drive its not much harder than doing a head gasket except for the wiring right .
     
  2. autox 89 dx

    autox 89 dx Member

    Messages:
    332
    Likes Received:
    8
    Joined:
    Mar 21, 2008
    Location:
    SF bay area
    :confused:
     
  3. autox 89 dx

    autox 89 dx Member

    Messages:
    332
    Likes Received:
    8
    Joined:
    Mar 21, 2008
    Location:
    SF bay area
  4. I_<3_my_EF

    I_<3_my_EF New Member

    Messages:
    27
    Likes Received:
    1
    Joined:
    May 18, 2008
    Location:
    Colorado
    i think you have everything you need man.
     
  5. D16SiHatch

    D16SiHatch New Member

    Messages:
    1,297
    Likes Received:
    44
    Joined:
    Sep 7, 2007
    sounds like you're on the right track. don't forget to remove the oil control jet from the block though once you remove the stock head. and get yourself an angle air sander and some medium/light grit pads. it will take the old gasket gunk off real quick.
     
  6. autox 89 dx

    autox 89 dx Member

    Messages:
    332
    Likes Received:
    8
    Joined:
    Mar 21, 2008
    Location:
    SF bay area
    koo, ya thats what i do for the most part right angle air grinder withe the little pads are killer
     
Verification:
Draft saved Draft deleted

Share This Page