1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

MSD Blaster coil

Discussion in 'General Tech and Maintenance' started by silicon_ghost, Apr 19, 2005.

  1. silicon_ghost

    silicon_ghost Junior Member

    Likes Received:
    Jun 16, 2004
    I have a 93 honda del sol D16Z6 and i got an MSD Blaster coil and i also have the distributor cap that goes with it. my question is, how do i wire it up? I took off my stock coil and i have about 4 wires. 1 wire goes to the negative. but than i got what looks like 3 wires that go to the positive, 2 of which plug into what i think is the ignition module. any help would be appreciated or are there websites out there that anyone knows off that would walk me through it? does anyone have this on their car that could show me a pic of how the wireing looks?
  2. 92civicb18b1

    92civicb18b1 The Trisexual

    Likes Received:
    Oct 1, 2003
    The asshole of the USA, New Jersey
    i cat help but word of mouth says that it's garbage. I don't have first hand experience.
  3. pissedoffsol

    pissedoffsol RETIRED

    Likes Received:
    Sep 28, 2002
    Retirement Home
    yeah, put it on ebay.. useless uless you're revving over 9500 rpms really...

    but anyway... if you want to hook it up,

    there should only be 2 wires on the coil... they are on the top right front if you are looking at the dizzy from the side of the car two more screws from the top, and the coil comes out.
    basically, you need to tap into those two wires to hook it up...

    ohh, and order yourself a spare ignitor or 50. those blaster craps seem to like frying ignitors...
Draft saved Draft deleted

Share This Page