ThatGuy4life
The Riced Sleeper
So I'm tryna get off the rotor, and that one phillips head screw that holds it in place refuses to turn, and i'm starting to strip it, any ideas on what to use to unscrew the dam thing?
We may earn a small commission from affiliate links and paid advertisements. Terms
take a hammer and beat the screwdriver into the philips screw
you need to hit it like you have a set to shock it and it'll come lose
or use a socket and 1/4" extension with a philips bit, then put the ratchet on it after you beat it with the hammer
shocking is the key
worst case = drill the head off then
fuck that, let me look in my tool box I'm sure I have a screw to fit if not autozone here I comei had the same trouble with mine, i used the hammer idea but i got some bad news for ya, those screws are like $20 each to replace from honda
put the phillips screwdriver in the screw to beat it in, 3rd hit the screwdriver slipped to the side and the rotor came with it, just to clarify I'm talking bout the rotor for the distributor guyswhat were you beating on to break the rotor?
i have never ever broken a rotor using this method
When I changed my rotor on my rex, the previous owner put lock-tight in the screw. Pain in the ass to get it off but I just used a drill and phillips bit and it came off.
And 4life you know damn well you cried like a little girl for your mommy!
Hahahahaha...............Naw just jokes
oh.... i was thinking brake rotor...
So I'm tryna get off the rotor, and that one phillips head screw that holds it in place refuses to turn, and i'm starting to strip it, any ideas on what to use to unscrew the dam thing?