I have a 94 accord with a blown f22b2 that I'm swapping to a jdm f22b1 vtec, my question is will I have any issues doing the swap? I have the ecu for the vtec, but is there anything else i might need also.....thanks
swap is a simple drop in and bolt it all back together. Did your new motor come with its own wiring harness ? If it didnt . your going to have to run 2 wires back to the ecu for the vtec. As far as yout distributor should work fine. 94,95 all the same no matter what F22 is in there.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.