We may earn a small commission from affiliate links and paid advertisements. Terms
Originally posted by E_SolSi@Jan 12 2004, 04:56 PM
you can just wire up a button elsewhere that can activate the horn .... bill had a button on the dash for his horn
QUOTE (E_SolSi @ Jan 12 2004, 04:56 PM)
you can just wire up a button elsewhere that can activate the horn .... bill had a button on the dash for his horn
I agree, just wire up a button somewhere else. My buddy had his wired up on his e-break handle because he always rested his hand there and wanted to be able to honk at retarted drivers at a seconds notice.
Originally posted by SixtySecondAssassin@Jan 12 2004, 07:27 PM
you'll have to make a contact that hits the back of the hub and is connected to the horn power wire thats with the srs/cruise harness. i think its a white harness under your dash with 5 wires. i just touched each individual wire to a ground until i found the horn wire. i wouldnt recommend this if you have a pass side airbag.
i used a thin piece of brass to make the contact and saudered the horn wire to it. i screwed the contact into one of the holes that was previously used to hold that coil of wires into place.