As the title states Im using a B18c type r in a 2000 honda Civic DX. Although Ive searched high and low I have found squat on this exact problem. What pump/hose combo do I use. This is my first post ever so be gentle.
I recently did almost the same swap but into a 2000 ex, we used the type r power steering pump and hose, and where it goes to hand line near the rack and pin, we cut it and used pressure fittings and attached the type r hose to the stock hard line
I would think that a B-series would hook up to the EK. It hooked right up to my EG pressure line with no problems and a 99/00 Si has a b-series pump. See if it fits
Ill try the 99/00 Si pump. Sound right to me. But the hose is different on the end of the DX. Although outrace1 has a good idea. There is no one around here that presses ends onto pressure lines. Would a Si hose work on my DX? Routing to rack?
What about a Del Sol VTEC? They are a different part number than the 99/00 Civic Si. Its the same number for OBD1 and OBD2 B16A3. A JDM OBD1 B series Pump might work too.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.