1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

prelude, accord, and other parts for sale

Discussion in 'Parts: For Sale/Trade/Wanted' started by JDM92Lude, Dec 8, 2007.

Thread Status:
Not open for further replies.
  1. JDM92Lude

    JDM92Lude Banned

    Messages:
    180
    Likes Received:
    1
    Joined:
    Nov 23, 2007
    Location:
    Mechanicsburg, PA
    Alright, i have a few things i am looking to get rid of cuz they are taking space in my garage:

    WILL TRADE FOR PARTS ALSO, LMK

    -DSM 440cc fuel injectors
    -full h23a1 motor or as below i will part it out....
    -h23a1 head(holding for someone)
    -P14 ECU
    -h23a1 intake manifold (fuel rail and injectors and sensors are available also)
    -h23a1 exhaust manifold (header but stock)
    -88-91 prelude shifter and shift linkage
    -h22a oil pressure sender (back of block)
    -h22a jdm bare block needs a little machine work but can be fixed(holding for someone)
    -h22a p13 jdm ECU w/ spoon sports chip
    -h22a stainless steel header
    -TWO 10" Volfehag dual voice coil 1000-watt peaks already in a sealed box, (will provide dimensions if needed), 200-watt mono block amp, i forget what make it is, and a complete wiring kit for it......
    -xbox with xbox surround sound system and 3 games with 2 controllers
    -chevy 350c.i. motor completely machined and bored, etc....ask about to get more details
    -basic pioneer super tuner head unit(cd player)
    -1995 honda accord body & other numerous parts...ask and ill let you know(the accord has been stolen and is no longer available, sorry guys...)
    - 94-95 honda accord wire-harness 5spd

    I have more parts then this laying around but this is all i can think of off the top of my head for now, let me know if there is something you need and ill let you know if i have it.

    Thanks all,
    Andrew aka "Moe"
     
    Last edited: Jan 14, 2008
  2. shay91racer

    shay91racer The Sh*t w/ Toilet Paper

    Messages:
    63
    Likes Received:
    0
    Joined:
    Oct 12, 2007
    just outta curiosity, how much for the head? and i'ma need that p14 and that intake mani

    also, can u post pics???
     
  3. JDM92Lude

    JDM92Lude Banned

    Messages:
    180
    Likes Received:
    1
    Joined:
    Nov 23, 2007
    Location:
    Mechanicsburg, PA
    for just the head ill do $40, for the head, intake mani, and p14 ill do $75 all together, and pics will be up hopefully later tonite....thanks
     
  4. JDM92Lude

    JDM92Lude Banned

    Messages:
    180
    Likes Received:
    1
    Joined:
    Nov 23, 2007
    Location:
    Mechanicsburg, PA
    Here is the pic of the head and the intake mani.....other pics will be posted soon...

    FYI: all sensors and fuel rail, etc... are NOT INCLUDED in all sales, unless asked otherwise, LMK thank you n hope to hear from some of you soon...
     

    Attached Files:

    Last edited: Dec 9, 2007
  5. JDM92Lude

    JDM92Lude Banned

    Messages:
    180
    Likes Received:
    1
    Joined:
    Nov 23, 2007
    Location:
    Mechanicsburg, PA
    bump $65 for the head and intake mani w/ ECU.....LMK
     
  6. SmoothRigoletto

    SmoothRigoletto SmoothRigoletto

    Messages:
    55
    Likes Received:
    0
    Joined:
    Jan 20, 2007
    Location:
    Charlotte, NC
    how much would you do the h22a p13 jdm ECU w/ spoon sports chip for? oh, and i live in Charlotte, NC 28216 if that helps any =)

    would you happen to have the wires to make the analog speedometer into a digital for the 92-96 lude?

    Also, let me know if you have info on it, what rev limit, speed governer, etc. thanks i'll appreciate it
     
    Last edited: Dec 12, 2007
  7. JDM92Lude

    JDM92Lude Banned

    Messages:
    180
    Likes Received:
    1
    Joined:
    Nov 23, 2007
    Location:
    Mechanicsburg, PA
    well i still have the ecu but the chip i just sold last night and was gettin on here to update it....anyway i will do $110 shipped to you for the ECU....

    No i don't have the harness to make the analog a digital for 92-96, if you find one let me know....

    Anyway, let me know what you wana do and if you need anything else let me know....thanks man
     
  8. JDM92Lude

    JDM92Lude Banned

    Messages:
    180
    Likes Received:
    1
    Joined:
    Nov 23, 2007
    Location:
    Mechanicsburg, PA
    bump If you still want the P13 ECU ill take $85 shipped to you. let me know man...and for the head n stuff $60 takes both head n P14 ECU
     
    Last edited: Dec 15, 2007
  9. 1bad96F22

    1bad96F22 New Member

    Messages:
    20
    Likes Received:
    0
    Joined:
    Dec 17, 2007
    Location:
    Sumter Sc
    parts

    do you still have the h22 block how much ihave a 96 and looking for swap what other h22 parts do you have.how much to ship and how much to ship h23 head if you still have it.
     
    Last edited: Dec 17, 2007
  10. JDM92Lude

    JDM92Lude Banned

    Messages:
    180
    Likes Received:
    1
    Joined:
    Nov 23, 2007
    Location:
    Mechanicsburg, PA
    yes i do still have the h22 block, it needs #3 cylinder honed n cleand up....ill have to look around my garage for the other h22 parts i have i know i have more though....$120 plus about $50 shipping for the block

    as for the h23 head, nobody has jumped on it yet and im willing to let it go $60 plus $30-$90 shipping depending on where your located

    dont quote me on shipping prices, let me know where your at and ill get prices for you...
     
  11. 1bad96F22

    1bad96F22 New Member

    Messages:
    20
    Likes Received:
    0
    Joined:
    Dec 17, 2007
    Location:
    Sumter Sc
    parts

    i am in sumter sc 29150 If you still have both after the new year I will buy have to get past christmas have 2 kids but after first of the year ready to get the ball rolling thank you
     
  12. JDM92Lude

    JDM92Lude Banned

    Messages:
    180
    Likes Received:
    1
    Joined:
    Nov 23, 2007
    Location:
    Mechanicsburg, PA
    yea i can hold the parts for you till then if your serious about getting them....and sounds good just let me know whats going on, and i will get specific shipping prices for you to then in the meantime, thanks man hope to hear from you soon...
     
  13. JDM92Lude

    JDM92Lude Banned

    Messages:
    180
    Likes Received:
    1
    Joined:
    Nov 23, 2007
    Location:
    Mechanicsburg, PA
    bump good parts just laying around, somebody buy them, cheap too!!
     
  14. 1bad96F22

    1bad96F22 New Member

    Messages:
    20
    Likes Received:
    0
    Joined:
    Dec 17, 2007
    Location:
    Sumter Sc
    no problem i will hit u up after the new year really appreciate it.Where would be agood place to ge parts to build a 300 to 400 horse motor already going to boost looking to run about 20 to 25 lbs trying to be cost effective if you see anyone on here with decent prices or anywhere else or if you have anything else hit me up.
     
  15. JDM92Lude

    JDM92Lude Banned

    Messages:
    180
    Likes Received:
    1
    Joined:
    Nov 23, 2007
    Location:
    Mechanicsburg, PA
    oh yea will do, i will make sure that the head and the block are ready to be shipped and get final prices for you including shipping, and like i said just let me know when your ready i have them here for you...and also about the parts well, you can go pretty much to any performance shop or machine shop to get parts and the motor done....i will also let you know if i can find parts for you to, and if i find anything for ya...thanks man, its been a pleasure and i will talk to you soon...
     
  16. 1bad96F22

    1bad96F22 New Member

    Messages:
    20
    Likes Received:
    0
    Joined:
    Dec 17, 2007
    Location:
    Sumter Sc
    thanx for info will b in touch i'm building this myself so i'm trying to get as many parts as possible for the low.
     
  17. philyphreak2127

    philyphreak2127 Back in the Game

    Messages:
    1,643
    Likes Received:
    13
    Joined:
    Oct 25, 2007
    Location:
    Littleton, co
    what do you have as far as accord parts go and for what years?
     
  18. JDM92Lude

    JDM92Lude Banned

    Messages:
    180
    Likes Received:
    1
    Joined:
    Nov 23, 2007
    Location:
    Mechanicsburg, PA
    my accord parts are all 1995, and its a 2dr chassis...i have pretty much anything on the car besides the motor n tranny....all the accesories panels seats, everything....i have some 95 4dr parts and some 94 2dr, and the wire harness i have is for a 94-95...
     
  19. JDM92Lude

    JDM92Lude Banned

    Messages:
    180
    Likes Received:
    1
    Joined:
    Nov 23, 2007
    Location:
    Mechanicsburg, PA
    bump parts need to go ASAP
     
  20. shay91racer

    shay91racer The Sh*t w/ Toilet Paper

    Messages:
    63
    Likes Received:
    0
    Joined:
    Oct 12, 2007
    i need that p14... how much? 72209
     
Thread Status:
Not open for further replies.

Share This Page