1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

problem f22b2 and f22a1

Discussion in 'HYBRID -> BA-BB /CA-CD' started by typesiracing, Oct 3, 2003.

  1. typesiracing

    typesiracing Senior Member

    Messages:
    204
    Likes Received:
    0
    Joined:
    Jul 15, 2003
    Location:
    ny
    my friend just asked me to help him pull his blown motor and exchange it for a good one....he told me it was the same motor but when he brought it to me i quickly noticed differences....well he couldn't bring it back so i told him we'd make it work somehow....but i have a few questions.....(f22b out and f22 in the car).....the fuel line connects on the other side can i extend a fuel line? will the shift linkage work? the wire harness didn't work so i swapped harnesses with the other motor and it matched better!?! can i use the distrubuter that works with the harness and ecu but didn't come on the motor? can i use either trans? there is a sensor coming out of the timing cover by the block....what is it? ah...maybe the crank angle because the distributer doesn't have one? well i told him u guys could get us through this so thanks for your help.
     
  2. dohcvtec_accord

    dohcvtec_accord WRX Sellout

    Messages:
    8,433
    Likes Received:
    1
    Joined:
    Sep 29, 2002
    Location:
    The left lane
    Please give us a little more info on the car and engines. Years of each, OBD classification of each, etc.
     
  3. brian11to1

    brian11to1 Senior Member

    Messages:
    9,203
    Likes Received:
    21
    Joined:
    Jan 9, 2003
    f22b is vtec i believe so you need to run vtec too
     
  4. dohcvtec_accord

    dohcvtec_accord WRX Sellout

    Messages:
    8,433
    Likes Received:
    1
    Joined:
    Sep 29, 2002
    Location:
    The left lane
    No, the F22B2 is not VTEC. Only the F22B1.
     
  5. typesiracing

    typesiracing Senior Member

    Messages:
    204
    Likes Received:
    0
    Joined:
    Jul 15, 2003
    Location:
    ny
    both motors are obd 1 non-vtec
     
Verification:
Draft saved Draft deleted

Share This Page