crypticcivic
Junior Member
what driver side top engine mount do i use. i am putting a 94 ls ino a 97 civic.
We may earn a small commission from affiliate links and paid advertisements. Terms
Originally posted by solblu@May 17 2003, 07:10 PM
Not sure if it's the same, but the B20's use a DX Civic mount in 5 gen Civic swaps
Originally posted by solblu@May 19 2003, 12:38 AM
Well the bracket you are telling him to replace on the motor with the two prongs fits a Civic DX mount, in a 5 gen Chassis.
Originally posted by Baker+May 19 2003, 12:55 AM-->solblu@May 19 2003, 12:38 AM
Well the bracket you are telling him to replace on the motor with the two prongs fits a Civic DX mount, in a 5 gen Chassis.
first off he doesn't havea 5th gen and if he did you don't have to replace anything the integra mount bolts right into the car
Originally posted by solblu+May 19 2003, 09:05 PM-->Originally posted by Baker@May 19 2003, 12:55 AM
solblu@May 19 2003, 12:38 AM
Well the bracket you are telling him to replace on the motor with the two prongs fits a Civic DX mount, in a 5 gen Chassis.
first off he doesn't havea 5th gen and if he did you don't have to replace anything the integra mount bolts right into the car
Do YOU have a B20 in your car???? The Integra mount DOES NOT work with a B20, and as I said in my first post I'm not sure on the 6th gen, but it is likely to be similar and a DX mount would have fixed his problem.
Originally posted by solblu@May 20 2003, 07:14 PM
OK you need to KNOW what you are talking about then. The B20 Will not accept an integr mount, and the DX one is the only one that will work. THe DX and EX ones ARE different. I have 2 B20's and this is a common question when you are in the middle of the swap because people like you who do not have the motor and have no experience with it assume it is the same as BXX motors. Call your Honda dealer and get part #'s before you ASSUME parts are the same, The DX and EX mounts are incompatible and very different. As stated above The DX mount ( the rubber one that connects to the 2 pronged one on the block and goes to the chassis) is needed to put a B20 in a 5 Gen.
I don't care what you think or have in your car it's not a B20 and so you don't know.