We may earn a small commission from affiliate links and paid advertisements. Terms
Originally posted by 1gEF-8@Apr 4 2005, 09:55 PM
are there any differences in resistance between integra and crx resistor boxes?
[post=482909]Quoted post[/post]
Originally posted by b16efhatch@Apr 4 2005, 11:11 PM
Not if you have the LS box.
[post=482920]Quoted post[/post]
Originally posted by 1gEF-8+Apr 4 2005, 10:15 PM-->b16efhatch@Apr 4 2005, 11:11 PM
Not if you have the LS box.
[post=482920]Quoted post[/post]
so it would be best to use the ls box with ls injector rather than crx box with ls injectors
[post=482923]Quoted post[/post]
Originally posted by clanny@Apr 6 2005, 08:14 AM
The crx vtec (b16a1) injectors are 2.45ish ohms. The b16b injectors that I just put in are 11.5 ish ohms. I didn't check what the resistance of the box was before I removed it but that may give you a starting point - check the ressistance of both sets of injectors and if they match, taaa daaa!
[post=483570]Quoted post[/post]