1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

SWAP WIRING HELP!!!

Discussion in 'HYBRID -> ED-EF / DA' started by SiR_Redneck, Apr 22, 2005.

  1. SiR_Redneck

    SiR_Redneck Member

    Messages:
    46
    Likes Received:
    0
    Joined:
    Feb 26, 2005
    i just swaped my Z6 into my CRX, i have everythin wired up and that exept for one plug, its the Purge valve, on the stock CRX it was on the Firewall as we all know and its a 4 wire plug. But on the Z6 it on the Fuel rail and its only a 2 wire plug, what i need to know is what i have to do to make it work, thanks everyone.
     
  2. droppedcrxsi

    droppedcrxsi Member

    Messages:
    52
    Likes Received:
    0
    Joined:
    Feb 18, 2005



    The evap purge is always 2 wire... green and black on your crx. You can use either the stock crx one, or extend those 2 wires to the evap .
    Ryan
     
Verification:
Draft saved Draft deleted

Share This Page