1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Swapping head question...

Discussion in 'HYBRID -> EG-EK / DC' started by orosco, Nov 13, 2004.

  1. orosco

    orosco Member

    Messages:
    57
    Likes Received:
    0
    Joined:
    Nov 10, 2004
    Everyone always say to do up a GSR motor or do a LS/vtec motor...I understand that its the best for all motor power, but isnt it true that a LS(non-vtec) makes more power on boost than say a Vtec head..I Have an LS and Im not sure if changing over to the GSR is even worth it considering im going to be running boost...Do i stick with my LS or swap over to the Vtec. rememeber I will be running boost and building up all the internals...
     
  2. handlebarsfsr

    handlebarsfsr Senior Member

    Messages:
    353
    Likes Received:
    0
    Joined:
    Jul 10, 2003
    if your going to boost it on the stock block, theres no point to adding a vtec head.
     
  3. phunky.buddha

    phunky.buddha Admin with a big stick Admin VIP

    Messages:
    28,465
    Likes Received:
    228
    Joined:
    Sep 30, 2002
    Location:
    Dallas / Fort Worth, TX
    Yes there is- you still get more power up top. It's not necessary to make really good numbers on boost though. If you don't have the cash to convert to VTEC before adding boost, don't worry about it. You can still make close to 300whp on a stock B18 without VTEC.
     
Verification:
Draft saved Draft deleted

Share This Page