TONS of B series/ integra parts, aftermkt and stok

[habitforming]

B16A1 PR3 head $300 (bare)
Skunk2 B16 intake manifold $200 SOLD
B16A1 throttle body (PR3) $50
GSR water pump (5k miles) $30 SOLD
GSR oil pump (12k miles) $30 SOLD
USDM Integra Type R pistons, 0.25mm overbore (P73-A0). converted to floating pin and LS rod, if you are doing LS/vtec conversion, this is what you need! $150
Eagle connecting rods $250 SOLD
z10 Engineering block girdle $200 SOLD
USDM Integra Type R intake valves $75
Crower Titanium retainers & Honda keepers(12k miles) $100
Crower Dual valvesprings (12k miles) $200
Crower 63402 camshafts (12k miles) $400
Micropolished, balanced crank $150 SOLD
Hondata intake manifold heat shield $35 SOLD
Lightened stock flywheel (~13lb) $30
DC Sports DAC intake w/ k&n filter $40 SOLD
JUN 4-2-1 header $400 SOLD
Catco 2.5" x 12" high flow catalytic converter $100 SOLD
Tanabe Hyper Medallion 60mm cat back exhaust $400 SOLD
AEM underdrive pulley set $100 SOLD
AEM adjustable cam gears $125
B&M fuel pressure regulator / gauge $50 SOLD
NGK spark plug wires $20 SOLD
Energy Suspension torque mount inserts $20

B&M Pro Edge short shifter $50 SOLD

Suspension Techniques front sway bar $75 SOLD
Suspension Techniques rear sway bar $75 SOLD
Tenzo R front upper strut brace $50 SOLD
DC Sports rear lower tie bar $60 SOLD
Ground Control coilovers $200 SOLD
Tokico Illumina 5 way adjustable shocks $200 SOLD
Full camber kit front and rear $100 SOLD
16" 5Zigen Becketts FN-01R C with 205/45R16 Michelin Pilot SX GT $900

Mugen program PR3 ECU $250
Apex'i V-AFC $225 SOLD
MSD Sport Compact Ignition $125

GSR gauge cluster $100 SOLD
JDM 1 piece headlights $150 SOLD

Alpine ERE-G190 $150


Make an offer on everything below (i have pictures available of everything):
B16a intake manifold, glass beaded and hot tanked
B18a1 cylinder head, intake manifold, throttle body
B18a1 pistons/rods
B16a1 intake valves (about 40k miles), will sell any qty
B16a1 Ti retainers/keepers (i do not know what brand they are... came with engine)
B16a1 valvesprings (dual intake, single exh)
B16a1 cam gears
B16a1 5 million series cams
B18a Fast Idle Valve
B18a fuel rail
B18a oil pan, pickup, windage tray
B18a right side cover (goes behind flywheel)
B18a thermostat housing
B18a water pipe
B18c5 pistons/pins, P73-A0, widened for LS rods
Prothane rear motor mount insert, i think it's for Auto trans
Streetwires battery post terminal with 2-4ga coated brass connectors
misc power steering brackets... i will send pic so you can determine if it's what you need
ITR lower header bracket (from block to header flange) NEW

the website for my car is at http://home.insightbb.com/~habitforming11/integra.htm you can see many pics there
many parts that come off of my car directly i will require the stock replacement for so i can still sell the car as a whole. i am not parting out the car itsself!
email me at andy_feger@hotmail.com for fastest response. most prices are negotiable within reason, no lowballers and please only contact me if you are SERIOUS. it gets very difficult to keep up with all the emails that pour in. also please include the part you are interested in in the SUBJECT of your email to make things easier for me. all prices do not include shipping.

thanks

 

[habitforming]

something tells me i feel a few pages behind... also thank you everyone for knowing how to read and emailing me rather than replying!!!!!

this is the only msg board that i've gotten no reply posts, another testament to the fact that brains do exist!

 

[habitforming]

also, the cylinder head is currently all together, and i would prefer to sell it that way (springs, retainers, valves, cams, gears, valvecover, vtec sol) please email me if you are interested in it, as i have a few people asking me to part it out

 

[habitforming]

TTT... added link on wheels

 

[habitforming]

TTT

 

[brian11to1]

I need an OBD0 distributor (for Integra), can you help?

 

[h22bubbleback]

ne shift linkage?

 

[D See 2]

USDM Integra Type R pistons, 0.25mm overbore (P73-A0). converted to floating pin and LS rod, if you are doing LS/vtec conversion, this is what you need! $150

... is this including the rods as well as pistons

 

[ddrcivic]

Not to get off the subject, but i love the color of your valve cover how'd you do it. what kind\brand\color of paint did you use. dying to know

 

[jdmcrx89]

250 shipped for that pr3 mugen ecu. whats the specs on it

 

[brian11to1]

B18a1 pistons/rods
how much shipped to 64015

 

[dgcivic]

Im interested in the MSD ign. for 125


email : dgperformance@tds.net


Thanks


Dave

 

[JCHatch]

I e-mailed you about the head/parts, I am interested in the complete head, thanks,
JCC

 

[turbo4dr]

i will buy those rods and pistons once if i hear some details on them first

 

[saturn_boy96]

you morons, this thread is like almost 5 months old.



some mod please

 

[h22bubbleback]

:bo: