alright i just got done swapping motors in my 94 civic coupe. i just put a motor in it with 80000 miles on it. i figured whille i had the motor out i would put a new clutch in it. well i ordered and exedy stage 2 clutch and a fidanza 7 pound flywheel off ebay. once i got the motor done it ran great. i could roll down the road at 20 and smash the gas and instancly roll the tires off and then burn 2nd off. now i was driving it and had just got done burnen 1st and 2nd and i went down the road about a mile and the clutch just quit. it would grab every once in a while but it would only last for about 5 seconds and stop. now it just makes a little grinding noise. also after i connected the motor to the tranny i could turn the motor over if the tranny was in gear.but if it was in gear i couldnt push the car. and if u pushed it in gear and pushed the clutch in it would move. i think it is in the clutch but am not entirely sure so if anyone has any ideas please let me know.