Upper Control Arm Bushings

[mxgx12]

I have a 91 HF CRX, it had a lame ass camber kit that replaced the stock front upper control arm bushings. Im trying to switch back to the original setup so I ordered some OEM bushings online. My question is: Is there supposed to be spacers that go on either side of the bushing? Like over the bushings and in between the Upper Control Arm bolt flanges? When I ordered the bushings they didn't come with any spacers. My lame Haynes manual doesn't say and I couldn't find a good diagram anywhere online. So if anyone one knows I'd really appreciate their info. I hope that makes sense, its kinda awkward to describe. Thanks

 

[K2e2vin]

Not really sure what you're talking about. If you're talking about the bolts that fasten the upper mounts to the UCA, then no, there's no spacers.

 

[mxgx12]

Ya I think were talking about the same thing. The horizontal bolts that pass through control arm mounts and bushings. 2 bolts, 2 bushings per arm.