1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

wastegate vaccum thickness??

Discussion in 'Forced Induction' started by bvtec, Oct 9, 2004.

  1. bvtec

    bvtec Senior Member

    Messages:
    114
    Likes Received:
    0
    Joined:
    Aug 10, 2003
    what thickness should the wastegate vaccum line going from the wastegate to the intake manifold be( 3.5mm,4mm,6mm etc),
    if it is a certain size should the other vaccum leads eg. boost gauge/bov etc leads be the same size.
    :)
     
  2. bvtec

    bvtec Senior Member

    Messages:
    114
    Likes Received:
    0
    Joined:
    Aug 10, 2003
    bump any1
     
  3. NotUrAverage_Si

    NotUrAverage_Si Senior Member

    Messages:
    2,255
    Likes Received:
    0
    Joined:
    Jul 9, 2003
    Location:
    :/
    All my vacuum lines are the same as the one that came with the greddy boost controller. That doesn't really help all that much but whatever.
     
  4. bvtec

    bvtec Senior Member

    Messages:
    114
    Likes Received:
    0
    Joined:
    Aug 10, 2003
    thanks any specific numbers in mm or inches on how thick they should be??
     
  5. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    53
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    1/4" and 1/8" is 98% of my vac system.
     
Verification:
Draft saved Draft deleted

Share This Page