salmaan_ali
Junior Member
Guys im currently stuck.
B16a is now in my car but its not started yet becuz of wiring issues ihave been facing
I ran 7 wires from the distributor (B16). and matched them color to color with the ecu pins (C1,C2,C3,C4,B10,B12,B15+B17)
I plugged seperate pins in their respective connecttors
Everythign else is the same as i had previously (Most of my sensors are D/C as first im looking for spark in dizzy)
As soon as i turn-on ignition. my Fuelpump starts for a sec PGM-FI light comes up and remains (dosent matter's i m also gettting colant temp sensor code as they are not connected... My MAp is also not connected but im not getting its CODE.. why???) but upon rotating the distributor there is no spark
i changed my ecu... changed my dizzy but no results
Im getting +12v at all four injecttors but dizzy is not firing
plez help
B16a is now in my car but its not started yet becuz of wiring issues ihave been facing
I ran 7 wires from the distributor (B16). and matched them color to color with the ecu pins (C1,C2,C3,C4,B10,B12,B15+B17)
I plugged seperate pins in their respective connecttors
Everythign else is the same as i had previously (Most of my sensors are D/C as first im looking for spark in dizzy)
As soon as i turn-on ignition. my Fuelpump starts for a sec PGM-FI light comes up and remains (dosent matter's i m also gettting colant temp sensor code as they are not connected... My MAp is also not connected but im not getting its CODE.. why???) but upon rotating the distributor there is no spark
i changed my ecu... changed my dizzy but no results
Im getting +12v at all four injecttors but dizzy is not firing
plez help