My problem is that I let my 19 yr old change the plugs...he forgot to tighten 2 of'em.
He said the motor started acting 'funny' and decided to drive it home....
125 miles....freeway miles. He got to within 2 miles of the house before it froze.
After reading a lot on all the forums and shopping for a straight replacement
D16Z6 long block, I realized for just a few hundred dollars more I could get a
B16 swap.
So now I'm in the market for a B16(A) to drop into a '93 EG del Sol. Current setup
is a D16Z6, S20 trans, P28 ECU chipped and modded for VTEC operation and an
OBD1 engine harness. Stock pump and injectors. Eidelbrock intake plenum and
cold air intake.
WTB:
B16 (JDM) Engine (less than 60k miles?)
LSD Hydro Trans (preffered)
Shift Linkage
Engine and Trans Mounts
ECU for Motor
Half shaft and TransAxles
Performance Clutch if possible
Did I miss anything?
Also, since the car was lowered and a performance handling package
was installed (Skunk2 springs and shocks, Front and Rear sway bars
and performance wheel and tires, 4 wheel dics out of an Integra) I have
found I need front and rear camber adjusters, so I'm in the market for
those as well.
I have $2000 and will purchase within the next 30 days. If anyone has
what I need or can put me in touch with some one who does I would
appreciate a heads up at giles42 AT comcast DOT com
Would prefer something within 300mi of Mobile, AL. 36605
Thanks in advance
ButchG
He said the motor started acting 'funny' and decided to drive it home....
125 miles....freeway miles. He got to within 2 miles of the house before it froze.
After reading a lot on all the forums and shopping for a straight replacement
D16Z6 long block, I realized for just a few hundred dollars more I could get a
B16 swap.
So now I'm in the market for a B16(A) to drop into a '93 EG del Sol. Current setup
is a D16Z6, S20 trans, P28 ECU chipped and modded for VTEC operation and an
OBD1 engine harness. Stock pump and injectors. Eidelbrock intake plenum and
cold air intake.
WTB:
B16 (JDM) Engine (less than 60k miles?)
LSD Hydro Trans (preffered)
Shift Linkage
Engine and Trans Mounts
ECU for Motor
Half shaft and TransAxles
Performance Clutch if possible
Did I miss anything?
Also, since the car was lowered and a performance handling package
was installed (Skunk2 springs and shocks, Front and Rear sway bars
and performance wheel and tires, 4 wheel dics out of an Integra) I have
found I need front and rear camber adjusters, so I'm in the market for
those as well.
I have $2000 and will purchase within the next 30 days. If anyone has
what I need or can put me in touch with some one who does I would
appreciate a heads up at giles42 AT comcast DOT com
Would prefer something within 300mi of Mobile, AL. 36605
Thanks in advance
ButchG