1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ZC pistons

Discussion in 'Engine Building' started by wacoykc, Sep 27, 2008.

  1. wacoykc

    wacoykc New Member

    Messages:
    1
    Likes Received:
    0
    Joined:
    Sep 27, 2008
    I'm pretty sure I holed a piston in my ZC sohc motor in a 91 CRX. It's prepped with a Jackson blower (6 lbs) and fuel controller. How can one be sure that the fuel controller is working, as the motor must have gone lean with boost, and with my bad hearing, I can't hear pinging. Are the pistons and gaskets in a stock ZC motor compatible with other 1.6 motors. Is there any problem with blowing a ZC motor. Are there any opinions on blower camshafts as long as I'm this far into the motor, As far as performance go's, it went like hell......for about 500 miles........Byron
     
  2. 1990 ZC REX

    1990 ZC REX New Member

    Messages:
    3
    Likes Received:
    0
    Joined:
    Sep 27, 2008
    Location:
    LAS VEGAS NV
    i have a 90 crx with the jdm zc in it.every part i buy at stores i buy for the d16 and they fit on perfect!a lot of people say the zc isnt dependable but i find it really reliable!the torque on it is nice,and i still have fuel rail and regulator to install!! Does anyone know how many psi i should go with for the fuel???
     
Verification:
Draft saved Draft deleted

Share This Page