zc tranny?

[91crx]

Do i use the 90-93 integra axles or the 86-89 integra axles for the zc cable tranny, also do i have to use dx or si hubs for it as you do with the b series trannys thanks



brett

 

[91crx]

alos can i use the si clutch and flywheel?

 

[phunky.buddha]

90-93 axles with the ZC intermediate shaft, DX or Si hubs.

You can use the Si clutch and flywheel if they match the year of the transmission. 88 has to go with 88, 89-91 are all interchangeable between each other.

 

[wiredjosh]

I used the d-series flywheel, but mine required a 92-95 clutch, so make sure which one you need before you order! The splines were different on mine from the 8-91 Si...

 

[91crx]

where can i get the zc intermediate shaft?

 

[91crx]

i alos heard that i can use stock crx axles if i dont use the zc inetrmediate shaft is this true?

 

[88bluehf]

dont believe so(si axles) believe its a diff spline ....you need a zc intermediate shaft. ive been told and have read on multiple forums that nothing else will work.

 

[krazywhitboy]

you can also use a 88-89 integra intermidiate shaft but you have to cut the top bolt off.....

 

[wiredjosh]

I am using 90-03 axles and intermediate shaft w/ my ZC trans. Works good.