1980 2nd gen civic b16 swap

cvccricebaby@yahoo.com · Feb 12, 2007

had the car for a year 80 cvcc civic just got the motor i did the mount placement befor the motor was here doing the b16 1st gen 90-91 civic sir motor. still have alot of pics people here told me to post it so im doing it.

cvccricebaby@yahoo.com · Feb 12, 2007

my new clutch kit 6 puc, 1600 lbs pressure plate should do fine it has springs for better off the line not so hard. New dizzy TD22 SIR

and the wiring off the usdm 90 civic hatch and did the VSS on the stock 80 instrument cluster.

phunky.buddha · Feb 12, 2007

Very nice!

Seany-izzle · Feb 12, 2007

awesome!

and Ji said you couldnt even fit a d16 in there... pssshhh

posol · Feb 12, 2007

bad ass. keep us posted

klyph · Feb 12, 2007

I don't understand the poll thing, but awesome project man :thumbsup:

cvccricebaby@yahoo.com · Feb 12, 2007

thanks guys ooohhhh it fits lol, there is about 1nch all around the motor trans and with the motor mounts i have the motor is not ganna move any.
Im doing the car wiring this week the motor is done mounted for now doing the axles now to. ill post more. it was easy to fit the motor trans, ill post what i did with the axles to fit this is ganna be great funny' its a pic and swap axle.

cvccricebaby@yahoo.com · Feb 12, 2007

pic of the line up and the room it has and did multi-laser level it works great.

cvccricebaby@yahoo.com · Feb 18, 2007

here is the driver side mount placement it was thin so i added more metal its all done for the mounts now putting the motor back in and doing the axles the axles are from the 84-87 civic the hub pline is the same as the 880-83 civic the trans knuckle is diff but the inside is the same change out knuckle to b16 i used 84-87 civic hub its easy. the contrl. arm is what im doing now i added 2 inch length with the hub knuckle off the civic 84-87 bigger brake Note: use the JDM 88-91 civic intermediate shaft not 90-92 integra its bigger the axles shaft are 17 inch both side with out ends. the 84-87 civic is 1.7 inch wider than the 80-83 civic thats the lower contrl. arm extenchion and strut. this is what i found out for now. ill post more as i go on.

klyph · Feb 20, 2007

That mount looks like it would eat children, but as long as it works I give it :thumbsup:

Do you think the Brake Master Cylinder is gonna fit with the larger engine in place? those lines look pretty close.

eg6sir · Feb 20, 2007

very nice.. keep us updated and post some vid when done

MRMOCOS · Feb 20, 2007

This is going to be fast! Cant wait to see the final product!

cvccricebaby@yahoo.com · Feb 20, 2007

master cyl

i test fit every thing i have the 80-83 master cyl and the 84-87 civic and the 88-91 civic master cyl and they all fit great same room as stock the lines you see on the pic are loose and look like it has no room. on the mounts i had to test fit again like the 6th time pullin the motor out. gatta line up huh! this sunday i will try to have it started. i have some buddys to help. im making track-bars for the front right now im thinking its ganna have wheel hop! the ride will be hard but better than hoppin. the wiring will be done by sunday. gatta look for stock honda rota 13 inch or 14 steal wheels cant go with 12 in. stock.

cvccricebaby@yahoo.com · Feb 20, 2007

i dont know how fast this car will be but should do ok, and yes ill do a vid of the car ill jump on it a lill. lol,

lil_red_rex · Feb 20, 2007

madd props for that swap...should be awesome^_^

cvccricebaby@yahoo.com · Feb 20, 2007

the last motor mount i didnt post it so here it is

cvccricebaby@yahoo.com · Feb 21, 2007

valve cover

what do you guys think ( Black valve cover --- or R red valve cover i have both should i put the red one on ??

aras2217 · Feb 21, 2007

man u are doing good
i have also 1st gen honda civic
i am planning to change engine to b16a
so maybe u can tell me all the process
i will wait for final step

cvccricebaby@yahoo.com · Feb 22, 2007

ill help out as much as i can but mine is 80-83 2nd gen civic engin bay is a lill bigger BUT there are a few people that put B16 and B20 in them the mounts are diffnt. and im sure it will fit with work. i will be done with mine. i did a RWD 90 civic 4door i put the 300ZX rear and a ford 302 V8 that was a Bi**h took me 3 years it ran and drove but was not done. i sold it for 1250.00 this is not the only thing custom i did ,90 subaru Justy 4x4 4 inch lift swamper lill turbo that was fun. it was nasty looking paint. it would go anywhere. the suspention was custom

cvccricebaby@yahoo.com · Feb 25, 2007

here is what i did this week-end and a pic of the room the master cyl has its off the subaru impr. RS and the red valve cover is on. have to get the small stuff now hoses exe. and the fuel pump off the 86-89 integra.

1980 2nd gen civic b16 swap

how do you like the bigger cvcc motor?

custom parts

custom motor swap

all and all

New Member

Attachments

New Member

Attachments

Mad scientist

Member

RETIRED

Dismember

New Member

New Member

Attachments

New Member

Attachments

Dismember

Supa Mod

New Member

New Member

New Member

i do body work!

New Member

Attachments

New Member

New Member

New Member

New Member

Attachments

Similar threads