Recent content by civic booster

im running a autometer guage

Greetings to all tuners my buddy just purchased an ek hatch with a supposed b18c type r engine we pulled out the injectors today to clean em and they look just like my d series injectors with the needle tip nozzle im also running a b18c but my injectors have holes on the tip of the nozzle. so im...

will do but i thought honda operating temps were 210. thanks

im running a ls vtec turbo set up built, cp pistons manley tuff rods etc When i run the car a little the temp slowly goes up to 210 not higher i usually let it cool and it goes bak dwn to 190+ so is this normal and is it ok to run at 210 degrees f..thanks im from the caribbean so its hot altho...

just so u kno a bov does not distribute pressure it releases pressure when ur throttle plate closes so u dont damage the turbo or TB .....jus my 2 cents

cabosse h22 uses link cables and there are no to springs on the leaver there is a box on top the tranny where the cables go that centers the shifter but i jus dont wanna open the box and things jus start to fly out anyone eva had any experience with this..thx tho..

im thinking it has to do sumthing with the little box on top the gear box where it returns the shifter to the center?? help please i race and cannot granny shift..

i hav a del sol with a h22 when i move the shifter to the left it does not center itself but wen i move it to the right it centers itself as it should and wen changing from 2nd - 3rd it grats if i power shift but if i granny shift it does not grate.. any help wud b appriciated thx..

ok well the speed sensor is most likely hooked up to the engine and ecu cuz its all in the original harness but i need to kno if my speedometer doesnt work whats the prob like is there a wire to go to the dash to make the vtec runn oh and by the way the engine is swining past 6600 now cuz im...

ok i found the engine light pin out and i think i have the vss wire do i have to hook up the vss wire to the dash for the vtec to work anyone??

or if any one can tell me the pin out or wire colour for the check engine warning light?? its a obd2a.

ok i understand but y dont i get any engine light on wen i unplug a sensor??

helpp ok the wiring guy not answerin his cell phone so i tried running the vtec wire directly to the pin out on the ecu wen i carried the car for a test the car is revvin to 8000 + but vtec is stil not kicking in anyone can help here thanks..

ill get the speed sensor checked but i noticed today that the vtec is not working so i guess il have to call the electrician but i still dont understand y the engine light does not come on when i unplug a sensor il hav to get all that sorted..thanks

just finised the swap ,Im running a b18c gsr in a ek3 00' civic the engine is using its original harness and ecu now the wiring guy came and did his thing i carried the car for a first pull and the limiter is coming in at around 6600rpm i also notices that if i unplug one of the sensors no...