Search results for query: *

The engine didn't run for a week.

yes there is enough oil in it and i did first heat up the engine. i shall renew the oil.

Got a new engine and it ran fine but a week later is tryed it agian. The head had a little more noize than usual. and a few minutes later also my check oil indicator lights up. This engine has an new oil filter and new oil. I suspect that the head isnt getting enough oil or something. What to do...

anyone?

Her are the vacuum line pics of my old engine and the new one. You can see that the d16a6 has an canister that the d16a9 doesnt have. After cheking everything mij ecu gives the faulty codes 11 and 17. Also my cooling fan doesnt work anymore. I used my new dohc ecu. These pictures are from this...

The d16a9 dint had a cat. converters i am certain of that. Its an european car. And yes the d16a9 has a sensor less on the pgmfi. After reseting the ecu the rpm is not good. Before resetting the ecu it ran fine but now...

Anyone?

I have a `89 civic 1.6 16v D16A6. This engine is replaced wiht a d16a9 from a ´89 crx. I used my own SI wiring on the d16a9. There are some difrences. The d16a9 has a sensor less on the pgmfi intake. The crx engine doesnt have a catalatic conferter and therefor also no sensor on the outtake...

After putting some new dash lights in my civic i had a short circuit. Now my dash ligts are gone also one of the rear light and my city lights are no more. I have checked all the lights and all the fuses are ok. What to check next?

oh its just the electronics??so if i swap the km/h plates+console off the crx into my civic the speed is accurate. The redline of the crx console is a litle bit higher

I wanted to know if my km/h meter is giving the good speed. I replaced my ED7 for an ED9 engine whit the ED9 gearbox. The crx ED9 has on the meter an topspeed off 220 and my ED7 has an topspeed of 200 on the meter. So what is true? Must i Replace the hole meter concole, just the meter pleats or...

No printable page?

I have swapped a DOHC engine in my civic '89. Total cost $550 i think but i did the swap alone.

between 100 and 110 HP, dont know for sure. Check your engine code on the internet.

happend after i disconected some plugs of the fuse box and forgot to unplug the battery.

My '89 civic 1600 wont start. Every time the "Alternator soleniod valve" fuse blows. Anyone knows a sollution?

YES i can count and it suprised me too, that code 11. An other civic owner dit the same swap and also put is si wiring on his dohc engine and also had that code. Maybe an ECU bug? Pause, flash,flash,flash,flash,flash,flash,flash,flash,flash,flash,flash,Pause. Realy strange.

I am sorry to say bit it is a code 11, and when i conect the o2 sendsor to the wiring there is still that same code. I contackted the local Honda dealer and the said the have never had an problem whit that code 11. It has something to do whit your fuel mix.

I just swapped my The old SI wiring to my d16a9 engine and now it starts great, I have only one code left from yhe ecu >>code =11, What doe it mean, what can i do about it?

I know what the problem is now. My old d16a6 is a engine whit katalic conferter and de D16a9 (dohc) is an engine whitout this. So this one has no lambda sensor(O2).I just swapped the wiring of my si engine to the dohc engine. i only have to modify my distrib. wires(camsensor) and then i hope i...