I'm not sure what's the lca's is.. but I'm throwing all this in.. checkout pics.. if those are the stuff of what u r talking about.. I only snap pics of one brake caliper.. the price includes the whole set of 4...
brake cable
Caliper and disc
brake valve?
Please get back to me by email.. as I...
no man... I was on a straight.. running from gear 1 @9000rpm (pivot shift light set at 8800rpm), gear 2 @9000rpm..., gear 3 about 8200 rev... a loud sound came from the front.. like a long blow off valve, car jerked hard... all lights came on... engine stall... everything comes to a stop....
I...
Hi... all i learned from my mechanic is that the rev limit has changed as the gear ratio differs from a 4.4 tranny.. I don't think the fault lies with the lightened flywheel... but because of the lightened flywheel I was pulling up high revs faster than before..but lose out on top speed...
stock ITR cams, springs n retainers.. CTR 81mm pistons, ITR 4.785 tranny, should be getting about a 12:1 compression...??
used to be able to rev til 9000 before the tranny swap and toda flywheel...
It happened when RPM was about 8000-8200 on 3rd gear...
recently i read some thread here about lighten flywheel.. I would like to share this with everyone with what happened to my engine...
I have a B18C 4.4tranny stock flywheel in my Civic SiR EK4, swap a 4.785 tranny and Toda lightweight flywheel in... I rev the new swap like before.. n tis wat...
If your location's in US it's $160.00 (air freight included, takes about 2weeks to reach you) Shown in pics is wat u'r getting.
pic01
pic02
pic03
pic04
Fender is in great condition, very minor scratches, no dents. Lenses on headlight great condition, no cracks no scratches.
I've got a B18C in my SiR EK4. Singapore's rules as sticky as Cali's rules.. big loud exhaust can get u a fine of $500 (@$300USD) Swapping engines can land you in jail and a possible $10,000 fine... but rules are meant to be broken anyway..
use your current valve cover.. n get someone to sand...
P28 for sale. Both auto and manual.
Write me if you want it chipped to your customised Vtec and rev limit.
Write me at monzeecoco@yahoo.com.sg for more details.
P28 ECUs pic1
P28 ECUs pic2
;)
scrapESi01
scrapESi02
Anything you need from a Honda Civic '92 EG ESi 4 door Japanese specs, contact me.. everything is for sale.. write me if you want the pics of different item..
My email address is monzeecoco@yahoo.com.sg
Engine block sold
Rear boot carpet sold
amplifier and speakers given away.
PR3 found in 88-91 Civc EF8, EF9, 88-91 Integra DA6, DA8 using B16A1 engine is OBD0
PR3 in 92-95 Civic EG6, EG9, 92-95 Integra DA6, DA8 using B16A2 engine is OBD1.
obd2 ecu can be chipped by using a emulator for 28pins chip(most commonly available performance chips) Emulator is plugged onto the OBD2 ecu acting like a adapter which allows you to pin on the 28pins chip.
Or by using a OBD2-OBD1 wireharness, so you can use a OBD1 ecu which most chips can be...
obd2 ecu can be chipped by using a emulator for 28pins chip(most commonly available performance chips) Emulator is plugged onto the OBD2 ecu acting like a adapter which allows you to pin on the 28pins chip.
Or by using a OBD2-OBD1 wireharness, so you can use a OBD1 ecu which most chips can be...
recent mod up on my EK4.. from stock flywheel and 4.4 ITR ttanny to lighter flywheel from Toda and 4.785 CTR tranny
Hell of a fast pickup accelaration but loss out on top end speed.. lower rev limits too..
Higher compression from the pistons.. (so becareful not to over rev) :spin:
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.