Search results for query: *

Did some horse trading and got a b18c1 core motor. Is this block actually a B18 or is it really better and where? Main webs? Oiling?, Thicker walls? I've already had a 18a block honed and am using 16 high comp pistons, but if this IS a better block/platform Maybe I'll use it instead. OH...

I wasn't sure where to ask this.. Suspension or swapping? Anyhow, I just picked up a (stripper) 95 gsr and wanted to use the whole suspension to swap into my 89HF. Will ABS calipers swap over like the other LS brake swaps? I did my 90 4dr from a plain 90 teg 4dr and it all went well for...

Hey, I was a thinkin again, and what about just 'gun-drilling' the stock fuelrail to a larger opening (ID)? It looks to be thick enough for alot bigger ID.. Would help those in stealth mode too. Thoughts?? I never really thought that an 1/8" or more would help cause it still has to make a...

Good morning.. NO time to search yet. Has anyone done this swap? Links would be appreciated too. I'd like to get best of both worlds without spending tons of $. I already found out that this HF crx that I have, has a si trans and would like to pop it in my 4dr and since it would be out.. I...

Hey, I'm at work and can't be on for a long time searching. Will the cams swap between the 90 civ 1500's and the 1600(a6's) and if so, is there any benefits for doing so? I know the heads swap but don't know if the cams will. Mine's runnin fine and don't want to swap the head yet. Just...

I'll try and post pics later tonight from home.. Purchased as a parts-car with a body kit. Using kit with my 89 hf instead. It's a 91 HF (I believe with a si hatch) that is JUST A SHELL. Can't say if ALL interior pieces are there or not. NO- engine NO- trans NO- engine wiring NO-...

I picked up a 94 teg console and wanted to install in my 90 4dr but its' from a auto and there is NO WAY that its gonna fit like everyone says and shows pics of. I would have to make some kind of adapter to get it to get close. If I hold it up to the bottom of the radio piece, the whole...

OK, didn't know where exactly to post this one but, Does anyone out there have that tool to lock the crank pulley when taking off the crank bolt that they aren't using anymore?? Sold the car, now they have it just sitting..? Want to sell it? Any "Venders" on here that sell them? E

Good morning, My older Brother has a 04 TL and had to replace the HID lighting on one side that was under warranty, and of course after it's run out it went out again. They're telling him that it's gonna be around 1300 to fix!! SO, is there a way to get back to a halogen or the like for lots...

Hey, this HF that I have runs OK but I have this 'A6' intake/dizzy and Pm-6 ecu that I was going to put on my 4dr. Can I swap the intake/ecu/dizzy out "plug and play"?? Since it's MPFI already I really don't want to 'wire' up anything.. I hate wiring! especially if it can poopoo my...

Got through looking at tons of threads and am tired.. Belt broke on the wife's accord (well, at least the rotor doesn't move while cranking.) and need to know if it's an interference motor or not..? I've got TONS of projects to work on and don't need to pull 'another' engine apart. I...

I can't remember where I saw it but it was some thread on a site showing a SI or dx crx dash being installed into a 4dr I believe.. OK, if it can be done, how hard is it? I'll be picking up another black 90 crx hf parts car and thought of doing the swap into my 90 4dr. Links or the like...

Hey, I just picked up a nice little 89 CRX and don't know how to locate info of what "exactly" it is.. It's either a dx or hf, being that there isn't a sunroof or rear wiper (yet). I did pull the carpet back to take a look at the ecu, but didn't have the right size socket but noticed a white...

Good morning, I picked up a nice little 89 crx hf and the head was already swapped but don't know which one. I'll be pulling the carpet back and checking the ECU in a short while. Near the outside ex port, there is a casting of "PM8" in front of what would be #3 cyl. I added a couple of pics...

Good evening, I was wondering if a turbo can be mounted in a way that the cold side intake can be pointing up..? I was thinking about this so I can utilize my space more. I think that the exit/dump tube would be lots easier to make too. Another thing, Can a oil cooler be inline with the...

Hey, know of a GSR head that the guy lost one cam tower near the middle. Can a 'new' one be ordered? Or use another and have it honed? Just a thought.. E

We are going to be selling my wifes accord so I've pulled these from the car to sell outright. The struts are the standard BLUE ones, and the springs are marked as "RACE".. 350.00 for the struts shipped to your door. 225.00 for the springs shipped to your door. PM me for more...

Now I've been messing with Hondas for quite a while but haven't talked to or heard/seen any correlation between the markings on the springs meaning what weight/spring load ratings they mean. Anyone have any info on that? Over the years I've aquired sets and sets of springs that I'm not...

I'm looking for a fellow Honda nut that can make a set (or more) of adjustable REAR lower control arms for my older(75-79) Honda civics. Of aluminum or steel but be able to utilize 3-poly bushings. I would like about 2" of adjustability. I'm not very proficient with computors so, PM me for...

good afternoon guys n gals.. I'm looking into getting some GSR H-beam rods and thought that they would work in either the B18 or B20 blocks that I have. The person states that his 'shop' told him the GSR rods were slightly thinner than the 18/20's, and wouldnt' work in my applications. I never...