Search results for query: *

how do I tell if the harness connected to the b18c1 engine I got is for OBD 1 OBD 2? I have an extra plug that doesn't connect to anything on the passenger side shock tower and one extra plug down by the tranny...

I checked all the fuses, swapped in a new ecu and my gauges still dont work! My CEL doesnt even come on. What could be the problem? faulty ground? but the only ground connections i know of are the one that connect to the transmission and the one that connects to the top of the engine head by the...

can someone clarify these questions for me? thanks in advance.. 1. If i buy a spoon racing p72 ecu or one of those other so called racing ecus off of ebay will my car still pass emissions, provided everything else is ok? 2. I have a auto p72 ecu laying around and i was wondering if those...

When i turn the key to the "on" position in my car the check engine light and the srs light dont come on, just the batt light and the oil light. then when i start the car the speedo, tach, fuel and temp do not work at all. could this be a fried ecu? (all fuses are good)

Hey guys, does anyone know of any reputable/good import performance shops in the chicagoland area?

Hey everyone, I swapped a b18c1 into my 95 civic. Everything was running fine until today when I had to jump start the car. After jump starting, none of the gauges (speedo, Tach, fuel, temp) work. Right before i used to start it the CEL light and SRS light would come on but they dont anymore. I...

Hey guys, I have a 95 civic with a 99 usdm b18c1 motor and 5 speed transmission. Lately, Ive been getting small puddles of what looked like oil underneath the car. So I took it to my local mechanic and he said that the whole transmission gasket is leaking and that it will cost 1100 to repair...

ok theres a black round thing on my civic that looks like a can on the firewall of my car.. it says purge on the top and has 3 hoses going into it.. what is that?? the gsr motor im putting in has these hoses but they are too big for this black can thing.. so i connected up the can thing that...

If your like me you just get frustrated when you see the carpet starting to sag from the door panels of your civic, Especially the EG's. Recently my buddy and I experiemented with different types of products, ie vynil sticker, new replacement carpet for the door panels and even paint. After...

after searching and finding some info on how to hook up a 99 gsr motor OBD2 into a 95 civic OBD1... I also found out that even if the IAB isnt hooked up right the p72 obd1 ecu WONT throw any fault CEL codes... SO how does one check to see if they did the wiring for the IAB correctly?

ok, after swapping in my 99 gsr motor into my civic, I drove it for about 1000 miles and then decided to change the oil because the engine had been sitting for some time before i swapped it in.... after another 700miles I just happened to look at the oil change sticker that jiffy lube put on the...

Does anyone know where to get good quality gauges for cheap? also is Mechanical or Electrical ones easier to install?

I put a 99 gsr motor into my civic but I have noticed it runs really hot. The temp gauge says it ok but when I pop the hood after drivng I notice it is exceptionally hot. I can even feel the heat from below the shifter inside the car.. Is it something to be worried about??? The temp gauge says...

I just finished my swap (99 gsr into 95) civic and was wondering if the 1.5L non-vtec motor could fit into my 93 integra. I know you may be asking why.. I am driving the civic but I want to get the integra running so I can sell it. I have all the mounts, axles and ecu that I took off the civic...

Ok so after completing my swap (a 99 gsr motor and tranny w/axles) into my 95 civic, I took it out for its first drive. and the passenger side axle came out of the tranny when I made a left turn. It came out just enough so that the grooves on the axle wouldnt catch with the grooves in the tranny...

I got a mint steering wheel out of a late model gsr, would i be able to swap it into my 95 civic? I dont really care about the airbag.

Hey everyone, I cannot remove the automatic pedal assembly out of my car. I am swapping in a manual tranny and I got the complete pedal assembly (clutch, brake and gas) with the swap I bought. I have opened up all the bolts and disconnected the brake booster. The pedal assembly moves freely but...

Hey everyone I need some help here to get my civic running. I got a 99 gsr b18c motor (obd2b) and a OBD1 p72 ecu installed in my 1995 civic dx. I have to wire it up for vtec so i purchased a vtec wiring kit which is turning out to be more of a hassle than helpful. I read in another post that for...