Search results for query: *

I am about to swap a b20 into my eg and would like to know if it is possible to retain the ps using the d-series pump. I would prefer to not use the b-series pump due to the line issues. Any input is appreciated.

Any one ever changed the shifter seal/gasket on a b-series tranny? Any tips/tricks/advice? Thanks.

I just swapped a d15b into my 92 lx and am having some problems. When I first start the car it won't stay running and after about about 20 secs of pressing the gas to keep it running it just clicks and stays running. It is also running kind of rich and was smoking when we first got doen with the...

Don't know if this is the right place to post this but...... I just completed my d15b swap and used my CX trans and it sucks!!! I can only hit vtec in 1st and 2nd gears. I shifted into third at 80mph today. It's driving me crazy!!! Hopefully I can find an EX trans around town on Monday. :angry:

I just got my d15b friday night and got everything done about 2 am last night. The motor was extra clean and runs amazing. Steve was very helpful and gave me a great deal. I highly recomend going with HMotorsonline if anyone is shopping around.

I installed my newe d15b last night and must now hook up the v-tec wires. Thre are two wires I have to hook up-green/yellow and blue/black. The question is there is a black wire grouped whith the blue/black plug which I am assuming is a ground. Can I ground this any where or does it need to be...

I need a po8 m/t ecu. If anyone has one or knows where to get one please let me know asap. I just ordered my engine and they were out of ecu's. Thanks guys.

I will be ordering my d15b this Friday and need to gather as much info as possible. Will my stock engine harness work (with the exception of the v-tec wires)? What do you guys recomend changing when I get the motor (timing belt, rear main, ect.). Do usdm and jdm ecu's have the same plug? Thanks...

Are the wires for V-TEC already run to the pass. side shock tower harness in a 93 CX? I know this has been asked here before but I cannot find the post or resources to answer my question. I am going to order a d15b from hmotors when I get my tax return in a few weeks and want to get everything...

I am looking for some 16 maybe 17 inch wheels for my 93 cx. I also have a 92 lx with 17's and they sit flush with the fenders with a +40 offset. I am planning on lowering the cx 2-2.5 inches and want a wheel that will tuck inside the fenders-So my question is what offset will I need to...

I have finally decided on my swap and am going to get a USDM b18b. I found a great price on a complete swap and have a few questions. Can I use the teg harness in my civic? Does it just plug in? Do I need to wire anything else since it doesn't have V-Tec (knock sensor or anything else?). Will...

I just wanted to get some other peoples opinion before I make my purchase. I change my mind alot so hopefully you guys can help me make my mind up. I originally was going to get this b16a3 from my friend but he romoved the head and it appears it has some surface rust in the cylinders. I don't...

I am going to buy a JDM d15b v-tec and am wondering what ecu originally ran this motor and also what ecu's can I use. I would like to use a USDM ECU if possable. Thanks.

I have a b16a3 from a del sol and am trying to use the wiring harness from the sol. The only problem is the wiring harness doesn't disconect at the fenders like my cx. I t goes all the way through the firewall to the fuse box and ecu. How do I use this harness with my car. Also I was told I...

I just did an intake manifold swap on my 92 cx. When I put the new one on (from an SI) it ran really bad. I figured it was too much air, and/or fuel so I put the stock one back on only to have it run the same way. I really need some help so if anyone has any input-please help! Also it ran fine...

i have a 92 civic cx which has like a 42mm TB bore and I have the chance to get an ex manifold with the TB for fairly cheap. Will it bolt up to my d15?

does anyone know what size bore the cx throttle body comes with stock? Thanks.

I have been researching my swap (B16a3 into 92 cx) and I have a question about the wiring. I have read a number of contradicting things about the wiring. I have heard that only the VX and SI are wired for v-tec. Also I heard every model in 92 is wired correct. I also read that you only have to...

I was wondering if I can use an unchipped p28 ecu with my b16A3? If so waht are the pros and cons? Thanks.

I have a 92 civic cx and I'm about to buy a Vtec from my friend. It's out a 95 Del Sol. Does anyone know if it's a B16a1 or what it is? How much wiring is involved in the swap? Do I have to get new/different motor mounts? If I use the del sol ecu is everything else plug and play? How difficult...