Search results for query: *

I live in Florida area and recently took delivery of my custom built mobile dyno. It houses a 2004 Dynojet 224x, with A/F and atmospheric monitoring. If anyone would like to have it at their shop, car show, meet, etc.. or for tuning time you can reach me at tuningtricks@comcast.net

Please e-mail me at swapdohc@earthlink.net if you have a p28 or p08. Thanks!

I have a 2000 JDM B18C (Type R) that I am putting a new timing belt on. I have done many timing belts and have never had this kind of problem. When I line up my cam gears my TDC mark on the crank pulley is aprox 4-5 degrees to the left (Toward the fron of the car). If I move a tooth on either...

I am looking for a b20 shortblock, I would prefer it to be complete but a bare block would be ok too. Cash in hand for th right deal, Please e-mail me at swapdohc@earthlink.net. Thanks for looking! Ps I live in SW Florida

I am selling my 91 Hatch, I need to make room for a new project car. The car was originally a base model 4speed (The lightest one). It is in very good condition and has been well taken care of, I drove it as my primary car for about a year with no major problems. It is very quick, I have never...

I damaged a crank pulley while removing the bolt (Used a chain strap wrench after an hour of fighting the f%$&er). So I now need a B-series oem crank pulley. I live in SW Florida and am best reached by e-mail at swapdohc@earthlink.net. Thanks

I am looking for a set of cloth 93-96 Prelude seats that are in excellent condition. Please email me at swapdohc@earthlink.net if you have something along those lines. Thank you.

I am getting no spark after replacing the head on a 95 prelude si auto (h23a1). The motor thru a timing belt and mashed the valves, bought a 2nd hand head, had it built w/new valves etc... put it back together and there is no spark. I replaced the coil as the reading I got off it seemed bad but...

I have a 94 Si w a ITR swap. I pulled up behind another civic hatch today who clearly wnated to run. When I stoped behing him there was nothing noticably different than any other time I had stoped. The light went green and we took off. My acceleration seemed less violent than it usually does...

I have a 94 Civic Si hatch with an JDM B18C. I get a stong vibration when I turn left at speed, i thought it was tire rub but it is not. This is not a click liike a bad CV, these are brand new axles for a 95 Del Sol VTEC. They may be a TINY bit short, maybe a 1/4". I can not find anything else...

WTB H23A Cylinder head (Non-vtec). I thru a timing belt and did in my valves. I am hoping to get one from someone who upped their engine to vtec and has the pld head lying around, Thanks.

I have a 94 Civic Si with a 2000 JDM ITR (B18C) swap with the factory header (2.5" collector + exhaust donut) and I would like to upgrade to a high flow cat or test pipe. Right now i have the original 94 Si cat on it with a custom flange that accepts the enormous collector but it is extremely...

I live in Florida and have a 94 Si w/ a 2000 JDM ITR B18C swap. I have just ordered a RSR ex-mag exhaust (The quite one) and intend on a new cat/test pipe. I am running all motor, is a tester pipe really effective vs a nice high flow cat? I know I can get away with anything but, being an...

I am going to look at a civic with an alleged JDM B18C Type R swap. How do I know if it is a gsr engine with a red JDM valve cover or the real deal? Does the GSR have duel valve springs like the type r? If it doesn't I figured I could pull the valve cover and see if there were duel springs or...

I have a 94 Civic Si with a 2000 JDM ITR B18C(5) that is sufocating :( What cold air intake fits properly. I was thinking either a DOHC Del Sol or an ITR. PLease help as is is not an easy thing to hear your baby gasp for air.

I am swaping a 2000 JDM ITR B18C5 into a 94 civic Si, I am having the P28 ecu chipped with skunk program and intend to use my 94 Si engine harness on the new engine. Do I need an OBD1 distributor? If I do is there any difference in DOHC OBD1 distributors? Thanks for your help in advance.

I am swaping a 2000 JDM ITR B18C5 into my 94 Si, the motor will be in my hands in two weeks. It is comming with entire harness intact and 2000 ITR OB2 ecu. Is it best to use this ecu or an OB1 ecu from a gsr or VTEC Del Sol? Do I need new hubs I don't know if the JDM ITR axles fit the 94 Si...

I need to wire this JDM obd2 b18c5 into my obd1 94 Civic Si. I have not been able to find much usefull info on how to do this yet and the motor is due to be here early next week. I would like to know what is the best ECU/OBD set up and how to handle the wiring. Is it worth while to go with the...

I am looking for a white 92-95 Si hatch to build as a project, of coarse a shell would be ideal. I will consider any 92-95 hatch but I figure why not try to find exactly what I want. I am located in Florida but do not mind if I have to transport. Thanks in advance for your time.

I recently bought a SOHC VTEC head I intend to swap onto my 91 Civic Si. There are two different D-series SOHC VTEC heads, one from the later model Civic EX (96-00 D16Y8) and one from the earlier Civic Si (92-95 D16Z6). I have been told that the post swap compression ratio's between the two...