Search results for query: *

Ok I have done the above swap. The car is obd2a I have got the conversion harness and converted it back to obd1. Running a p28 ecu. Car will not start. Its not getting a pulse at the injectors. I can spray wd40 into the intake and it will run as long as I do this so I know the motor is...

Ok i put a b18c4 gsr motor into an eg. 94 civic. I have put a skunk 2 intake manifold on it as well. The motor is in and running, But it wont idle right. It goes from 2500rmp to 5000rpm and just flucuates between these figures. Its also blowing lots of blue smoke out of the back while its...

There isn't a spot for swaps into these as it may not be that popular of a swap. Just looking for some input. The odyssey has a f23 from stock with an automatic. The f22 came in some acords and preludes so the set up in the bay must be similar as I have a prelude intake kit fitted to it now...

I have put a 93 gsr engine in a 99 civic ex, I use the ex loom on the GSR motor. I have converted it so all the plugs are in the right location and repined what was needed for it to work. So I go to start it and nothing. I am not getting 12volts at the ecu. The main relay is not clicking over...

Ok I am doing a swap. The car had a D16y8 single cam vtec. I have a 95 B16a2 which was obd1. I have converted it to obd2a and I am using the wiring harness from the D16y8. Problem is there is no knock sensor on the back of the B16 like there normally is. Is there a by pass wiring trick for...

Ok I have just done this swap. I have used the b16b harness on the b18c ITR motor. I am running a obd2b to obd2a conversion harness and the itr ECU. The car wont start. Sounds like the start sol is just clicking along with the main relay in the dash. I have swapped the starter motor out for the...

Ok I have just done this swap. I have got a p28 ecu and an obd2b to obd1 conversion harness. I cant get the car to start. It seems I am not getting the fuel pump to come one. If I put my stock ecu back in the pump comes on and I can get the car to start. Although this ecu dosn't have vtec so...

I am about to take on this task. I have a 91 crx with a b16a1 in it. And want to put it in my 91 civic 4 door. The 4 door is a 1.4 carb model so I know there are a few things I will need. Can anyone give me a ruff idea of whats needed for the swap. I was hoping I could get most of the parts from...

I have put a 99 b16a2 into a 96 coupe. There is no vtec pressure swithc on the side of the head where it normally would be. The ecu plugs on the 99 obd2b had no vtec pressure switch wire but I know the car had vtec as I drove it before taking the engine out. So now its in the new car its...

I have an odb2a non vtec harness. I have put a b16a2 from an obd2b car. i have stripped the obd2b harness off the motor and attempting to wire up the obd2a harness. I have the ecu print out that shows me where the vtec solenoid,Seconday O2, and primary O2 goes. and the Vtec pressure switch...

Ok I have just swapped a 99 b16a2 out of an EM1 into a 96 ek coupe. The coupe had the d16y7 in it. The problem I am having is the ecu from the em1 had one extra gray plug that does not seem to be in the harness in the 96 coupe. I was wondering if it needs a conversion harness but both cars...