Search results for query: *

Does anyone know of some good places to get a turbo install in the Denver/ Colorado springs area?

Can someone post some pictures of a t3/t4 turbo? I want to see the difference in looks compared to a t3 turbo besides size. How can I tell the difference just by looking at it?

I have a H22 swap in my 96 accord and I'm having a turbo installed. Do I need to get RC Injector Plugs with my setup? :worthy: :worthy: :worthy:

OK... I have a h22 accord and will be adding a turbo soon. It is running on a p13 ecu. I have been thinking of using a program like Hondata but, then I would have to go with the p72 ecu. If I bought the p72 ecu and didn't hook up the Hondata system but got a good tune would it work ok?

What do you guys think about this one? Any thoughts??? http://cgi.ebay.com/ebaymotors/ws/eBayISAP...TRK%3AMEWA%3AIT

I'm going to be installing a turbo on my car soon and will be getting a gauge pod pillar w/ three holes. I am going to put in a boost gauge and an oil pressure gauge but, what should I do with the third one? Here are the options: Air/Fuel, Volt, Oil Temp, Water Temp, or Vacum Which one sould I...

So I will be getting a turbo kit for my h22 accord. One similar to this: http://cgi.ebay.com/ebaymotors/VECCO-Turbo...991276212QQrdZ1 Should I get a T3 or go with the T3/T4? This is a street accord with stock internals for the time being. Plan on going with a P72 with hondata or uberdata as...

I have a 96 H22 accord, only street driven. I am uprgading my clutch to an ACT street disk and whant to know if I should get a streetlite flywheel or a prolite flywheel. The difference in $ is only about $25. What are the pros and cons of getting each?

I have a 96 H22 accord that will have a turbo soon. I am interested in getting Hondata but, it seems they don't use the p13 ecu's. Am I wrong? What ecu would be a good subsitute for me? I am street driving only. Thanks, Carlos

I have a 96 accord that has a jdm h22 engine in it. I just bought a LSD h22 tranny to do a auto to 5-speed conversion. Before I install it, I want to upgrade the clutch and flywheel but, I have not decided on which one to get. Clutchmaster, ACT, Centerforce? Which one? This is a daily driver...

I have a 96 accord (obd2) that has a h22 swap (obd1) with auto tranny. I want to do a 5-speed conversion. If I get a 97 h22 tranny will it work right? What would be the diffrerence between a obd1 to an obd2 tranny for my swap? Thanks :)

Over the next year and a half I plan on having a turbo done to my h22 on my 96 accord. Auto to manual w/LSD is going to be done this summer. My questions are: 1. Should I build the internals first? Cams,pistons,etc. 2. If I put, say, crower cams made for a turbo on first, would it drive funny...

I did a H22 swap in my accord last year but, it's auto and I want to go 5-speed. I have a few questions first: 1. My car is a 96' and the engine is a 92-95. I did the obd2-obd1 conversion. Which H22 trannys will fit? 2. I will get some type of LSD installed, I have heard of Phantom Grip. What...

I swapped a auto h22 in my accord. I an using a jdm p13 ecu with a us p14 tcm. The tcm was shifting at about 6000 rpms which sucks. I was told to try a p13 tcm. I got one and now when I hook it up, my transmission locks up and I can't get it out of Park. Does anybody have a picture or a chart...

I have an auto p13 running my auto h22. The vtec was kicking in at 5500 rpms and shifting at 6000 rpms so something had to be done. I bought a chip from Advance Timing, which said the vtec would kick in at 5000 rpms and shift at 7500 rpms. I had my chip installed and the check engine light stays...

So I've been interested in getting some cams for my H22 accord. This is a daily driver. My friend has some skunk2 stage 2 race cams for sale. The stage 2 cams, specs are IN. lift 0.505, 270 duration EX. lift 0.465, 275 duration. Is this what I would need? Should I be looking at stage 1...

So I've finially decided to go NA. All motor Baby! But where do I go now? I have a 96 accord w/ H22. I've already done i/h/e. Don't have a high flow catback. New plugs and wires, pulleys, fuel rail. No aftermarket regulator or filter yet. Vtec controller for later on. Should I finish off some...

Well, I was going to wait till the summer to do this but last Wednesday someone rear ended me while I was at a stop sign. It was snowing pretty bad so I wasn't too mad at the guy. Anyways, I have a 96 Accord w/ H22 setup. I currently have a Tanabe dtm racing medallion exhaust. With the $ the...

I saw some sideskirts that I was interested in. They are made of abs plastic. What is this? Is it durable like urethane or is it like fiberglass?

I have a obd1 h22 in my accord. Do you think it would be better to use a chipped p13 ecu or a vtec controller. Or both, performance wise.