Search results for query: *

I have a B16 headfor sale. It has skunk2 titainium dual springs and retainers, Ferrea 1mm oversized valves, ported and polished, ready for ls vtec, can include B16 cams if desired, this head is ready to produce some serious HP.... chadb16head.jpg - Image - Photobucket - Video and Image Hosting...

Hey I have two b18b's and one is seperated from head and other is still all together. I am looking to get rid of them shoot offers and trades let me know what you have. looking for turbo stuff for my ls vtec if you have anything let me know or around $250 obo for each motor plus shipping...

Hey I have a b16 head with ferrea 1mm over size valves, sk2 titanium dual springs w/ retainers, 5 angle valve job, sk2 stg. 2 turbo cams, ported and polished, selling w/ obd1 dizzy, IM, pretty much you just bolt it on and plug it in, also may sell arp ls vtec head studs, oh and it is tapped for...

Hey as it says I have a 94 civic ex and I put a ls vtec in it. The motor runs ok up until where vtec is supposed to kick, once it hits vtec the motor feels like it hits a rev limiter...I have perfect oil pressure, its all wired up correctly, when I changed vtec to a different point it does the...

Hey guys I need a Vtec solenoid for my b16 in my 94 Civic. let me know if you can help out, need prices shipped to 99217. Let Me Know!!!! I need it ASAP!!!!!

I have a Ls long block(from valve cover to oil pan/ No tranny) for sale took it out of my integra and put in a GSR. Need to get it gone!!! Asking $350 for it plus shipping or $350 picked up, I am in Spokane, Washington 99217, let me know I also have a LS block out of a 97 LS that you can get...

Hey guys I recently got my motor in and the guy helping me w/ some wiring fucked up and now my p28 is fried, I need a new one ASAP. If you have one let me know how much shipped to 99217. dont ask me how it got fried cause it is a long bad story.

Well I got some head work done and put it back on yesterday it runs a little rough, need to do a valve adjustment but now it is throwing a error code 4 which is CKP Sensor (Crankshaft Position Sensor) and I am just wondering if anyone has any idea why? I have everything brand new, I mean less...

Hey I need some help here, I have a 95 Civic Ex, chipped p28 the motor is low comp. and it runs fine and idles fine untill warm when cold it idles around 1k then once it warms up it will idle at like 200 rpm and sometimes when driving when I come to a light it will die because of the low idle, I...

Ok, well lets see I have a Ls Vtec b18a bottom and b16a head in my 94 coupe. I got it in and it was running really good, it was built for turbo so it makes a bit of noise when running, clearances in cylinders, sounds like a diesel. But thats all fine I drove it for a few days and then it died...

Hey I have a lsvtec mild build and I am looking for a good manifold to run my turbo on. I bought one from a friend who got it off ebay, (SSautocrap), and it has been a peice of shit and broke 3 or 4 times and I am tired of tryin to fix it. I have a Garrett gt40 turbo, let me know if anyone can...

Hey guys I need the rear motor bracket for my 95 civic with my gsr going in it. I just need the bracket anyone able to help let me know!!! Need this ASAP!!!!

Hey guys whats up, I have 1 OBD1 B18b and an OBD2 B18b, one has the head stud holes in the block stripped and the other is good as far as I know, I got these for my 94 civic but the found a GSR motor and went with that. Just need to get these gone!!! let me know what you have and or what you are...

Hey whats up, I am looking for the rear tranny mount from a 94+ teg for a B series in my 94 coupe. Can't find one around here. anyone able to help me out, not lookin to spend too much, kinda broke after motor build. Let me know asap please!!!!:confused:

Hey, whats up guys I have a couple of LS motors for sale. They are the motor only, no tranny, ecu, harness, dizzy. I got them for backups for my LsVtec and I have ran into money problems. The motors may have a few things wrong, I was told the OBD2 LS has a couple stripped head stud holes in the...

I have a complete D16Z6 for sale.... it comes with an extra block and the complete tranny, the extra block has a clutch, flywheel, alternator, timing belt, starter and other stuff on it, so you'll have 2 of a lot of parts. It also will come with the shift linkage, axles, distributor, oil pans...

I have a JDM B16a for sale. It is a complete swap EXCEPT for the mounts, Long block, Tranny, ECU, Harness, Intake manifold, exhaust manifold, Axels, Linkage, clutch, pressure plate.... Everything you need to drop it right in EXCEPT for mounts. This is out of my 91 Civic Hatch. The motor was only...

OK, well I have a JDM Red GSR RHD Front clip I am parting out, it has no motor, tranny, or axles, everyting else is still there...I can also get many othr front clips, I can get you a Type-R clip for 6K-7K Plus shipping...If you would like any clips, any JDM parts, motors, I mean anything JDM...

OK, well I have a JDM Red GSR RHD Front clip I am parting out, it has no motor, tranny, or axles, everyting else is still there...I can also get many othr front clips, I can get you a Type-R clip for 6K-7K Plus shipping...If you would like any clips, any JDM parts, motors, I mean anything JDM...

Hey guys I have a 85 hatch That just needs to go I need money to finish my build.... I was hoping to get like 600 for it, it runs strong and drives well, I mean its a classic, someone wants it right.. I am located in spokane, Wa if you want it I would prefer it picked up.... :cool: