ok well i have a 90 prelude that is my every day driver and the b-pipe busted off of it and i want to replace it with a new exhaust. does any one now were i can find a cat back for this car. Ive tried to search on google and yahoo, for it but cant find anything!
let me know what you have seen...
ok i already have a b16 swap in my 91 hatch. well what i was wondering what you guys would do? would you do a ls/vtec or would you sleeve and bore a b16 out to a 1.8 so that way you stilll have the same affect as the ls/vtec. since i already have the block! just trying to do this the right way...
so is the a priority that i should consider. i just did a b16 swap in my 91dx hatch. do i need to change the fuel pump out to a high flow fuel pump? the car runs awsome. the only time i have a problem is at constant speed. it boggs down a little but doesnt loose power! not sure what it is but...
ok we finally got my motor in my car got it all done and started up. after two turns of the key it started right up. ran awsome. no smoke no nothing thing runs like a champ. well while it was in the air we decided to see if it would go into gear. well 1, 2 went in fine. but 3 was a little rough...
ok im doing a b16 in my 91 hatch this weekend. well the problem is i got a greedy header with two o2 sencor bungs down by the cat. now if i have to extend the wire down to the new location then will this make my car run rich? do to the fact that the o2 is not at the stock location. they are...
does any one know how to put the eg or ek side skirts on an EF hatch i seen this done on another site but the guy never responded to me about how he did it! so if you know how to do this then let me know so that i can do it. and i will post some pics of the finall piece.
thanks
joe
i need a 91 integra input shaft for a bseries swap in my 91 hatch back. if you got it let me know and how much!
also this needs to be a manual trans input shaft!
i have a d15b2 distributer, out of a 91 civic dx. that is the dpfi.
its like a year old has new cap and rotor and comes with ngk plug wires. they are only a year old as well. i want $75 for it +shippping!
ok i got a 91 civic hatch with a stock d15 in it.
im about to do a b16 swap and i noticed that the rear mount bracket was different. i was wanting to know what mounting bracket i need for that. i was going to get a 91 teg mount bracket from a body of mine but wanted to make sure that this was...
ok i was wanting to know what every one thought about different clutches and which one i should go with when i do my swap if you can give me some insite that would be great.
joe
i was wondering what length i need to cut a 90 teg shift linkage down to so i can put it on my b16 in my civic. if any one has done this let me know.
also i was wondering if there is any other companies that make axles for that swap other then hasport. or what i need to do to make my own...
you heard it im looking for a dc sports 4-2-1 header for a b-series motor i am trying to collect as many parts for my motor before i put it in so that way i can make it a little esier on the installation process!
well if you got it and want to get ride of it pm me or email me at...
lookig the european stock side skirts and rear bumper lip for a 91 civic hatch!
also any one know if any other company then j's racing makes a front lip for this car as well?
want a b16 header that will clear in a 91 hatch back.
also new clutch and flywheel as well.
also need cam and cam gears if you got them, nothing to crazy!
thanks
does any one know were i can get a carbon fiber rear deck lid? i know seibon is going to be makeing them in the next year or 2 but i cant wait that long. so if you have any ideas then just let me know. i already got fenders and hood. need more though ;)
i've got a few things that i need to get ride of!
all this stuff is for 88-91 civics unless said so!
driver side head light: $10
driver side bumper turn signal: $5
stock corner lights: $10
stock air box and k&n drop in filter: $10 new price
chickara header: sold
rear speaker...
just wondering what all i need?
do i have to use different motor mounts
thats the biggest question and what do i need to do about the wireing issues with the DPFI.
what suggested ecu.
i think p06 mugen chiped and re burnt would be good enough.
but i just want your guys oppinion and what...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.