Chris Franks
New Member
I have some questions about my 1989 Civic Wagovan that has an 89FD 1500cc engine that is dual-point fuel-injected. The Haynes manual is little help and our local Honda dealer threw out all the "ancient" shop manuals.
It seems as tho the EF forum would be the place for me, but my engine is type KHN15V5F1F1 and these people are using d numbers.
The engine flunks Texas inspection because of high hydrocarbons. I am sure this is because the thing on top of the injector body that looks like a 1960 automatic choke is always closed even when the engine is hot. It would open if vacuum were supplied to the diaphragm next to it, but that control is connected to a tandem solenoid. The solenoid clicks when I apply 12 volts to it, and the two rubber hoses are connected just like it is shown on the underhood emissions label; one goes to the diaphragm and the other to the thing that would be an air cleaner on a 1960 model, but there is very little vacuum in that location; it goes to the air filter over by the battery via a huge hose.
When I supply vacuum to the diagphragm with a hand pump, the diaphragm operates and the "choke" opens up, leaning out the mixture and probably passing the test. Maybe the problem is that I need to supply the tandem solenoid with a better vacuum from the manifold and hope the inspector does not see the T-connection that would be required.
What am I missing here?
It seems as tho the EF forum would be the place for me, but my engine is type KHN15V5F1F1 and these people are using d numbers.
The engine flunks Texas inspection because of high hydrocarbons. I am sure this is because the thing on top of the injector body that looks like a 1960 automatic choke is always closed even when the engine is hot. It would open if vacuum were supplied to the diaphragm next to it, but that control is connected to a tandem solenoid. The solenoid clicks when I apply 12 volts to it, and the two rubber hoses are connected just like it is shown on the underhood emissions label; one goes to the diaphragm and the other to the thing that would be an air cleaner on a 1960 model, but there is very little vacuum in that location; it goes to the air filter over by the battery via a huge hose.
When I supply vacuum to the diagphragm with a hand pump, the diaphragm operates and the "choke" opens up, leaning out the mixture and probably passing the test. Maybe the problem is that I need to supply the tandem solenoid with a better vacuum from the manifold and hope the inspector does not see the T-connection that would be required.
What am I missing here?