ImportAutoPerformance
New Member
Hello HS Members!
We are new to this community (have specialized in this industry for 11 years) so wanted to start off with a bang!
Here is a SMOKIN' deal on an OMNI-Power 68mm throttle body for $99 shipped!
Omnipower 68mm Taper Bore Throttle bodies are 8mm larger in diameter than the OEM 60mm Throttle body. This results in a much larger opening for incoming air and dyno proven 12-15 WHP gains (modified engine with port matched intake manifold opening). Omnipower Throttle Bodies are OEM quality castings which appear stock to the untrained eye. Each Omnipower Throttle body comes with a New gasket, and is a direct bolt on to the factory intake manifold.
Why Cast vs Billet?
As regulations become more and more strict, law enforcement is targeting modified vehicles. Omnipower Cast Throttle bodies look and function like stock to the average Joe, where as a billet Throttle body sticks out and will quickly become a ticket magnet should you get pulled over.
Key features:
OEM Quality Casting and Appearance
Larger Than Stock
12-15 WHP Gains
Includes New Gasket for Easy Installation
Add a Genuine OMNI-Power Throttle Position Sensor for only $69.99!
Throttle body comes with new gasket and will fit:
88-00 Honda Civic (some models require an aftermarket intake manifold)
90-01 Acura Integra RS/LS
90-01 Acura Integra GSR (requires aftermarket intake manifold)
97-01 Acura Integra Type-R
92-01 Honda Prelude
90-02 Honda Accord (98-02 4-cylinder only)
Note: Taper bore specs are 69mm inlet down to 68mm outlet.
Click Here to purchase or for more info.
We are new to this community (have specialized in this industry for 11 years) so wanted to start off with a bang!
Here is a SMOKIN' deal on an OMNI-Power 68mm throttle body for $99 shipped!
Omnipower 68mm Taper Bore Throttle bodies are 8mm larger in diameter than the OEM 60mm Throttle body. This results in a much larger opening for incoming air and dyno proven 12-15 WHP gains (modified engine with port matched intake manifold opening). Omnipower Throttle Bodies are OEM quality castings which appear stock to the untrained eye. Each Omnipower Throttle body comes with a New gasket, and is a direct bolt on to the factory intake manifold.
Why Cast vs Billet?
As regulations become more and more strict, law enforcement is targeting modified vehicles. Omnipower Cast Throttle bodies look and function like stock to the average Joe, where as a billet Throttle body sticks out and will quickly become a ticket magnet should you get pulled over.
Key features:
OEM Quality Casting and Appearance
Larger Than Stock
12-15 WHP Gains
Includes New Gasket for Easy Installation
Add a Genuine OMNI-Power Throttle Position Sensor for only $69.99!
Throttle body comes with new gasket and will fit:
88-00 Honda Civic (some models require an aftermarket intake manifold)
90-01 Acura Integra RS/LS
90-01 Acura Integra GSR (requires aftermarket intake manifold)
97-01 Acura Integra Type-R
92-01 Honda Prelude
90-02 Honda Accord (98-02 4-cylinder only)
Note: Taper bore specs are 69mm inlet down to 68mm outlet.
Click Here to purchase or for more info.