puffnmagicdragon804
New Member
So I have a 90 b18a1 obd0 block I just swapped into a obd1car everything I have on block is obd1 wire harness ,dizzy, alternator intake everything except block what can I do to make this compatible to run
90 b18a1 swap obd0 in my 95eg hatch
- Thread starter puffnmagicdragon804
- Start date
- Replies 2
- Views 896
We may earn a small commission from affiliate links and paid advertisements. Terms
"blocks" aren't any obd.... they are metal castings.
The electronics on the manifolds,etc are what need to match. If you did all that, all you need is a p75 ecu. depending on what trim model your hatch is, you may need to convert the 02 sensor to 4 wire if your harness from plug to ecu doesn't have it. (only 92s did if i recall)
The electronics on the manifolds,etc are what need to match. If you did all that, all you need is a p75 ecu. depending on what trim model your hatch is, you may need to convert the 02 sensor to 4 wire if your harness from plug to ecu doesn't have it. (only 92s did if i recall)
