'92 Civic Hatchback B18b

We may earn a small commission from affiliate links and paid advertisements. Terms

davidb

Junior Member
Hopefully I am about to stuff a 1995 B18b Integra Engine into a 92 Civic Hatch. If I wanted to run a turbo on it, what would a safe, streetable boost level be? This will be on complete stock internals. Also, what kind of crank HP would I be looking at with a turbo at a safe PSI? I just want a Honda that can go down and run with Mustangs and Camaros and be streetable and reliable as this will be my daily driver.

:woo:

I just hope I am not expecting too much on a budget.
 
if you just want some nut, i would go with a greddy kit, with the 18g turbo, and the intercooler/bov kit as well.
should get you 220 or so to the crank on 7 psi
 
12 lbs is probably the safest on stock internals, my brothers CRX LS turbo runs only 9 lbs with a 10:1 ratio on mid-built motor pushing out 230.
 
Originally posted by viciousracing@Apr 9 2003, 03:37 PM
12 lbs is probably the safest on stock internals, my brothers CRX LS turbo runs only 9 lbs with a 10:1 ratio on mid-built motor pushing out 230.

mAN IF HE HITTINF 230 WITH STCK INTERNALS THERE NOT GOING TO LAST LONG
 
Back
Top