94-01 integra front end on 4gen civic

[dragon2003]

well i am planning to put a 94-01 integra front end on my 89 civic and was wondering what would be needed to do this.

 

[92civicb18b1]

Originally posted by dragon2003@Apr 3 2005, 04:15 PM
well i am planning to put a 94-01 integra front end on my 89 civic and was wondering what would be needed to do this.

[post=482155]Quoted post[/post]​

A LOT of custom work and most likely the radiator support.

It's going to look bad, defenitly won't go with the lines of the rest of the car.

A 90-93 would look a tiny bit better but that's still pushing it.

 

[reckedracing]

you're prob gonna have to chop the rear ends of the fender to 1. shorter them and 2. match them up with the doors... the front end will need to be lengthened, and most likely widened...

if you want something original why not get a one piece front or JDM front conversion... or even the 90-93 like he said above...
92-95 civic might look better than either integra models...

 

[dragon2003]

well what would i need to put the 92-95 civic front end on it, well i want to do this cause it is different, and i don't want to get a one piece cause it is not a drag car, or the jdm front cause i know soo many people out here with that already.

 

[dragon2003]

well as for the 94-01 integra front end, here is the site where i found a 4gen with an integra front end on.
http://www.cardomain.com/id/getpaid

 

[YouKnowWhoIBee]

5th gen in a crx...

a guy on civicland did it. As far as the 94 and up teg front end... i dont think it looks too bad. The rear of that car sucks. But he did make that interior pimp. I like the look of it. But if anything i would do the jdm front end. You will save money and not regret nething

 

[Estorvito]

Originally posted by YouKnowWhoIBee@Apr 3 2005, 08:50 PM
5th gen in a crx...

a guy on civicland did it. As far as the 94 and up teg front end... i dont think it looks too bad. The rear of that car sucks. But he did make that interior pimp. I like the look of it. But if anything i would do the jdm front end. You will save money and not regret nething

[post=482248]Quoted post[/post]​

Thats ugly..My .02 but i have to admit he did a good job.....

 

[Citizen_Insane]

This is the ugliest thing I've EVER seen.

Oh wait, I just had to scroll down a bit for worse!

bahahahaa

 

[SlushboxTeggy]

Originally posted by dragon2003@Apr 3 2005, 07:34 PM
well as for the 94-01 integra front end, here is the site where i found a 4gen with an integra front end on.
http://www.cardomain.com/id/getpaid

[post=482242]Quoted post[/post]​

i think he tried to sell that on ebay a while back. but anyway i like the 5th gen civic front end.

 

[Seany-izzle]

what about the 6th gen front end on a crx....if i remember correctly, that doesnt look that bad, atleast no worse than the integra conversion.

 

[dragon2003]

well i don't want to do the jdm conversion cause it looks similar to my stock front end, thats why i'm am looking for a front end that would look different but good on my car.

 

[94accordex]

Originally posted by ktanaka@Apr 3 2005, 10:00 PM

This is the ugliest thing I've EVER seen.

Oh wait, I just had to scroll down a bit for worse!

bahahahaa

[post=482315]Quoted post[/post]​

That rear end is just about the fugliest thing I've ever seen...

What's with wasting all that money on conversions anyway? Who cares if your car looks similar to someone else's, you can still make it nice and clean and have a very respectable car. I'd much rather see a CRX with the JDM front end than that wide-body monstrosity driving around with that ugly ass end.

 

[reckedracing]

Who cares if your car looks similar to someone else's, you can still make it nice and clean and have a very respectable car. I'd much rather see a CRX with the JDM front end than that wide-body monstrosity driving around with that ugly ass end.

it all comes down to personal opinions and preferences...

some poeple like the side body monstrosity look...
they also have 350 lb girl friend... for that same wide body monstrocity look...

 

[Smonkeyboy]

haha, dont even make me post the BMW, Supra, Mercedes, CRX pic.




if you want a conversion, just save yourself the trouble, be subtle and get this.

 

[dragon2003]

okey maybe i will get the sir front end conversion

 

[ripperbone]

you want to make a civtegra.

dont do it

 

[the ghoul]

I had to bring this one back from the dead to post an answer... geeze this question was asked back in 05!!
https://hondaswap.com/civic-del-sol-eg-ek/integra-front-end-swap-238402/
this thread was a big inspiration for me documenting my swap..

 

[INJEN78]

ewww

 

[eg6sir]

I had to bring this one back from the dead to post an answer... geeze this question was asked back in 05!!
https://hondaswap.com/civic-del-sol-eg-ek/integra-front-end-swap-238402/
this thread was a big inspiration for me documenting my swap..

you brought it back from the dead to answer nothing, but to try and show off your lame conversion..