solobomber
New Member
hello everyone
ok so heres my story. recently i build a ls vtec motor using a b18a1 block and a b16a2 head also a gsr tranny. im running the obd2 si ecu. heres the problem with my motor it started just fine but with high rpms and it wont idle for jack squat. Its not showing any engine code what so ever until i unplug a sensor. i by passed the crank angle senser re wired the distributor but i broke my knock sensor
and its currently not plug in can anyone give me some ideas to where the problem might be at![Frown :( :(](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
ok so heres my story. recently i build a ls vtec motor using a b18a1 block and a b16a2 head also a gsr tranny. im running the obd2 si ecu. heres the problem with my motor it started just fine but with high rpms and it wont idle for jack squat. Its not showing any engine code what so ever until i unplug a sensor. i by passed the crank angle senser re wired the distributor but i broke my knock sensor