yOnKiNaToR
Junior Member
first off, i have a 92 lude which had an h23 in it. i now have a newly installed jdm h22 with internal coil distributor. i'm not an electrician, but i figured out that i needed to run a wire from the coil to the battery (temporary) to get it to start if using the h22 distributor. i'd like to use the new distributor that i received with the new engine rather than the old distributor.
i've searched around honda-tech, collectiveracing, and here. the only thing i've found is from 2point6 on how to convert the old distributor to an internal coil one. instead, how do i use the new distributor? can it be converted to external coil, or is there a way to wire it using the the internal coil? any help much appreciated.
sorry if this was explained in earlier posts; i must have missed it.
i've searched around honda-tech, collectiveracing, and here. the only thing i've found is from 2point6 on how to convert the old distributor to an internal coil one. instead, how do i use the new distributor? can it be converted to external coil, or is there a way to wire it using the the internal coil? any help much appreciated.
sorry if this was explained in earlier posts; i must have missed it.