b16a2 swap in a 97 hatch running the stock cx harness, obd2a-obd2b jumper harness and the p2t ecu (from 99-00 civic si).
It is throwing the following codes:
P1337 - CSF Sensor No Signal
P1106 - Barometric Pressure Circuit Range/Performance
P0131 - (PRIMARY HEATED OXYGEN SENSOR CIRCUIT LOW VOLTAGE) OR POOR
ENGINE PERFORMANCE
P0132 - O2 Oxygen Sensor Circuit High Voltage (Bank1, Sensor1)
P0141 - 02 Sensor Heater Circuit Malfunction (Bank 1 Sensor 2)
I am guessing these are all wiring issues. The car seems to have that plug on the oil pump for the CSF Sensor with wires going into the stock harness but is not making it to the ecu.
Any have solutions for to fixing these problems?
It is throwing the following codes:
P1337 - CSF Sensor No Signal
P1106 - Barometric Pressure Circuit Range/Performance
P0131 - (PRIMARY HEATED OXYGEN SENSOR CIRCUIT LOW VOLTAGE) OR POOR
ENGINE PERFORMANCE
P0132 - O2 Oxygen Sensor Circuit High Voltage (Bank1, Sensor1)
P0141 - 02 Sensor Heater Circuit Malfunction (Bank 1 Sensor 2)
I am guessing these are all wiring issues. The car seems to have that plug on the oil pump for the CSF Sensor with wires going into the stock harness but is not making it to the ecu.
Any have solutions for to fixing these problems?