I aquired a B18 series engine from a freind, engine has complete wiring harness, exhaust header and intake, also the computer, transmission, all motor mounts (This was originally in a late 90's Integra I am not sure on the trim level as the car was debadged) and Cylinder head, I paid $200 for this engine and I personally saw it run. My questions are these:
1. Are there commercially available engine mount converters for this engine to fit without modification of engine bay? (I.E. cutting or removing existing brackets)
2. If not what ones will need to go/be modified? ( The current engine in my car is a D16Y7 with a hydraulic 5-spd manual)
3. I am looking to keep this an N/A swap as a turbo is expensive but not out of the question however what sorts of modifications would be needed to allow room for such an addition in the future
4. I am going to do a full rebuild from the ground up on all internals, New pistions, cams, valves, springs, cranskshaft, ect any recommended brands/groups that give you a lot of performance for not obscenely high prices.
5. What sorts of modifications would be needed in the drivetrain to allow for the different engine and are parts available for it. (I.E shorter/longer cv shafts larger diameter hub assemblies ect)
Thanks much.
1. Are there commercially available engine mount converters for this engine to fit without modification of engine bay? (I.E. cutting or removing existing brackets)
2. If not what ones will need to go/be modified? ( The current engine in my car is a D16Y7 with a hydraulic 5-spd manual)
3. I am looking to keep this an N/A swap as a turbo is expensive but not out of the question however what sorts of modifications would be needed to allow room for such an addition in the future
4. I am going to do a full rebuild from the ground up on all internals, New pistions, cams, valves, springs, cranskshaft, ect any recommended brands/groups that give you a lot of performance for not obscenely high prices.
5. What sorts of modifications would be needed in the drivetrain to allow for the different engine and are parts available for it. (I.E shorter/longer cv shafts larger diameter hub assemblies ect)
Thanks much.